Sample Record
DIME Sample ID 2018-07-11-3
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 213059 DEA: 023H2204 EFIS: 0217000071 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH,BUT-32-0.0/2.7,D2.7/D4.7,4.7/5.0 |
| Award Date | 03/15/2018 |
| Closeout Date | 01/08/2019 |
| Work Description | PLACE HMA OVERLAY, SHOULDER BACKING, GUARDRAIL & REPLACE AC SURFACING. |
| Location Description | BUTTE AND TEHAMA COUNTIES FROM BUTTE COUNTY LINE TO 1.6 MILES EAST OF SODA SPRINGS ROAD |
| QA Service Level | 1 (Verified on 03/05/2018) |
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
Sample Information
| Sample Taken Date | 07/11/2018 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/11/2018 | Sample type | Department Acceptance |
| A brief description of the sample | 3/4 HMA A 15 rap PG64-28m Valero | The quantity of what the sample constitutes | 4 boxs |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Monte |
| Last name of sampler or witnessed by | Spencer | Title of sampler | TET |
| Telephone number of sampler | Unknown | Laboratory sample identification | D77536 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Knife River, Orland |
| Transportation Laboratory (TL) Number | T101 C894781 | Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C 894781 |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set | HMA Pay | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2018-07-11-3-1 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 07/12/2018 | No | 3/4 HMA A, 15% rap, PG 64-28m Valero. | ||||
| 2018-07-11-3-2 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 07/13/2018 | No | 3/4 HMA A, 15% rap, PG 64-28m Valero. | ||||
| 2018-07-11-3-3 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 07/13/2018 | No | 3/4 HMA A, 15% rap, PG 64-28m Valero. |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-07-11-3-1 AASHTO T209-12
DIME Test ID: 2018-07-11-3-2 AASHTO T275-07r12
DIME Test ID: 2018-07-11-3-3 AASHTO T269-14