Sample Record
DIME Sample ID 2026-10-20-34
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 209698 DEA: 072332E4 EFIS: 0700000391 COOP: 0705187 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-I-5-45.4/54 |
| Award Date | 07/01/2021 |
| Closeout Date | Not set |
| Work Description | Addition of 14 miles of HOV lanes in both directions would extend existing carpool lanes on the I- 5 in San Fernando Valley to Santa Clarita Valley |
| Location Description | The I-5 North Capacity Enhancements Project focuses on improvements to the I-5 freeway from cities of Santa Clarita and Castaic, beginning at the SR-14 interchange to Parker Rd. |
| QA Service Level | 2 (Verified on 02/03/2021) |
Owner Lab
- CT D07 - Plant Services, Unit 1841
Sample Information
| Sample Taken Date | 10/20/2026 | Sample Unique Key | 34 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/20/2026 | Sample type | Acceptance |
| A brief description of the sample | 3/4" Combined Cold Feed Aggregate | The quantity of what the sample constitutes | Sample 2 of the day @ 750-1500 Tons |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Kevin |
| Last name of sampler or witnessed by | Hopkins | Title of sampler | Plant Inspector |
| Telephone number of sampler | 310-345-6186 | Laboratory sample identification | KH202B |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Materials HMA - Sun Valley | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Sample Location
Latitude 34.230707 Longitude -118.378882
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4" WMA-SP/PG58-16/RAP 25%/WMA 0.5% | The fabricator/manufacturer designation for the sample | |
| The plant number | A detailed description of where the material sample was collected | HMA Plant Cold Feed Conveyor | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | JMF#220200W SVA VLO | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-10-20-34-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Kevin Hopkins, CT D07 - Plant Services, Unit 1841 | 10/21/2026 | 10/21/2026 | No | ||||
| 2026-10-20-34-2 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Kevin Hopkins, CT D07 - Plant Services, Unit 1841 | 10/21/2026 | 10/21/2026 | No | ||||
| 2026-10-20-34-3 | AASHTO T255-0: Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying | Kevin Hopkins, CT D07 - Plant Services, Unit 1841 | 10/21/2026 | 10/21/2026 | No | ||||
| 2026-10-20-34-4 | AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | Kevin Hopkins, CT D07 - Plant Services, Unit 1841 | 10/21/2026 | 10/22/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-10-20-34-1 AASHTO T27-14
DIME Test ID: 2026-10-20-34-2 AASHTO T176-08
DIME Test ID: 2026-10-20-34-3 AASHTO T255-0
DIME Test ID: 2026-10-20-34-4 AASHTO T11-5