Sample Record
DIME Sample ID 2026-08-27-50
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001403 DEA: 11430824 EFIS: 1119000162 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R66.2/R67.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | PCC & HMA PAVING, SIGNS AND STRIPING, WSMS & AUTOMATED LANE CLOSURE. |
| Location Description | SAN DIEGO COUNTY ABOUT 12 MILES NORTH OF OCEANSIDE FROM 1.2 MILES SOUTH OF SAN ONOFRE COMMERCIAL VEHICLE ENFORCEMENT FACILITIES TO SAN ONOFRE COMMERCIAL VEHICLE ENFORCEMENT FACILITIES |
| QA Service Level | 1 (Verified on 08/04/2025) |
Owner Lab
- CT D11 - District 11 Materials Laboratory
Sample Information
| Sample Taken Date | 08/27/2026 | Sample Unique Key | 50 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/11/2026 | Sample type | Production Start-Up |
| A brief description of the sample | 3/4" HM-A | The quantity of what the sample constitutes | 12 boxes |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Gerardo |
| Last name of sampler or witnessed by | Cordero | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Corona | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | 220200W CORD SJR | |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2026-10-2: HMA Aggregates (Size 3/4"): Sieve Analysis With RAP | 2 | 2026-08-27-50-9 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-08-27-50-2 | AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 10/13/2026 | 10/13/2026 | No | NON COMPLIANCE Requires the Correction Factor applied once established | |||
| 2026-08-27-50-3 | AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 10/13/2026 | 10/13/2026 | No | Complies Target 2.513 - Tested 2.507 | |||
| 2026-08-27-50-4 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 10/13/2026 | 10/13/2026 | No | Complies Target Low and High within 0.024 Gmb - Tested Low-2.413 and High-2.420 Gmb | |||
| 2026-08-27-50-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 10/13/2026 | 10/13/2026 | No | Complies Target 4.0% ( +/- 1.5% ) - Tested an Avg of 3.6% | |||
| 2026-08-27-50-7 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 10/14/2026 | 10/14/2026 | No | NON APPLICITABLE - REQUIRES THE CORRECTION FACTOR APPLIED ONCE ITS ESTABLISHED | |||
| 2026-08-27-50-9 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/15/2026 | 10/14/2026 | No | RAP N/A | |||
| 2026-08-27-50-10 | AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/15/2026 | 10/13/2026 | No | RAP Complies | |||
| 2026-08-27-50-11 | AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/15/2026 | 10/13/2026 | No | RAP Complies |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-08-27-50-2 AASHTO T308-25
DIME Test ID: 2026-08-27-50-3 AASHTO T209-25
DIME Test ID: 2026-08-27-50-4 AASHTO T275-07r12
DIME Test ID: 2026-08-27-50-5 AASHTO T269-14
DIME Test ID: 2026-08-27-50-7 AASHTO T30-19
DIME Test ID: 2026-08-27-50-9 AASHTO T30-19
DIME Test ID: 2026-08-27-50-10 AASHTO T308-25
DIME Test ID: 2026-08-27-50-11 AASHTO T209-25