Sample Record
DIME Sample ID 2026-08-27-49
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001403 DEA: 11430824 EFIS: 1119000162 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R66.2/R67.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | PCC & HMA PAVING, SIGNS AND STRIPING, WSMS & AUTOMATED LANE CLOSURE. |
| Location Description | SAN DIEGO COUNTY ABOUT 12 MILES NORTH OF OCEANSIDE FROM 1.2 MILES SOUTH OF SAN ONOFRE COMMERCIAL VEHICLE ENFORCEMENT FACILITIES TO SAN ONOFRE COMMERCIAL VEHICLE ENFORCEMENT FACILITIES |
| QA Service Level | 1 (Verified on 08/04/2025) |
Owner Lab
- CT D11 - District 11 Materials Laboratory
Sample Information
| Sample Taken Date | 08/27/2026 | Sample Unique Key | 49 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/19/2026 | Sample type | Production Start-Up |
| A brief description of the sample | PSU | The quantity of what the sample constitutes | 5 bags |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | N/A |
| Last name of sampler or witnessed by | N/A | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Corona | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | See Mix |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 220200W CORD SJR |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2026-10-2: HMA Aggregates (Size 3/4"): Sieve Analysis With RAP | 1 | 2026-08-27-49-1 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-08-27-49-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/07/2026 | No | N/A Need RAP gradation to complete combined report | |||
| 2026-08-27-49-2 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/07/2026 | No | Complies | |||
| 2026-08-27-49-3 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/07/2026 | No | Complies | |||
| 2026-08-27-49-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/08/2026 | No | N/A | |||
| 2026-08-27-49-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/08/2026 | No | Complies | |||
| 2026-08-27-49-6 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/08/2026 | No | N/A | |||
| 2026-08-27-49-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/07/2026 | No | Complies | |||
| 2026-08-27-49-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 10/08/2026 | 10/07/2026 | No | Complies |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-08-27-49-1 AASHTO T27-14
DIME Test ID: 2026-08-27-49-2 AASHTO T176-08
DIME Test ID: 2026-08-27-49-3 AASHTO T96-02r10
DIME Test ID: 2026-08-27-49-4 AASHTO T84-14
DIME Test ID: 2026-08-27-49-5 AASHTO T304-11
DIME Test ID: 2026-08-27-49-6 AASHTO T85-13
DIME Test ID: 2026-08-27-49-7 AASHTO T335-09r13
DIME Test ID: 2026-08-27-49-8 ASTM D4791-10