Sample Record
DIME Sample ID 2026-09-18-55
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 995228 DEA: 07347904 EFIS: 0718000123 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-405-31.2/41.4 |
| Award Date | 03/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE HMA, RHMA, JPCP, ISR, & REPLACE BRIDGE SLABS. |
| Location Description | LOS ANGELES FROM WILSHIRE BOULEVARD UNDERCROSSING TO VICTORY BOULEVARD UNDERCROSSING |
| QA Service Level | 1 (Verified on 01/22/2024) |
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
Sample Information
| Sample Taken Date | 09/18/2026 | Sample Unique Key | 55 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/01/2026 | Sample type | Verification |
| A brief description of the sample | 3/4" RHMA G SP 0.5% LAS | The quantity of what the sample constitutes | 4 Bags of Comb. Agg, 1 Bag of Crum Rubber, 1 Bag of Hi-Nat |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Christian |
| Last name of sampler or witnessed by | G. | Title of sampler | QC |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Materials - Sun Valley | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-09-18-55-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | DM, CT D08 - Fontana Southern Regional Laboratory | 10/01/2026 | 10/14/2026 | No | Combined Virgin Aggregate Gradation. | |||
| 2026-09-18-55-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 10/02/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | EJ, CT D08 - Fontana Southern Regional Laboratory | 10/02/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | EJ, CT D08 - Fontana Southern Regional Laboratory | 10/06/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Tran, CT D08 - Fontana Southern Regional Laboratory | 10/07/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 10/02/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 10/02/2026 | 10/14/2026 | No | ||||
| 2026-09-18-55-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 10/02/2026 | 10/14/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-09-18-55-1 AASHTO T27-14
DIME Test ID: 2026-09-18-55-2 AASHTO T84-14
DIME Test ID: 2026-09-18-55-3 AASHTO T85-13
DIME Test ID: 2026-09-18-55-4 AASHTO T96-02r10
DIME Test ID: 2026-09-18-55-5 AASHTO T176-08
DIME Test ID: 2026-09-18-55-6 AASHTO T304-11
DIME Test ID: 2026-09-18-55-7 AASHTO T335-09r13
DIME Test ID: 2026-09-18-55-8 ASTM D4791-10