DIME » All Projects » Project - DEA: 112N2354 » Sample 2026-09-08-50 » Sample Details

Sample Record

DIME Sample ID 2026-09-08-50

Project Information

Project IdentifiersProject ID: 1002589
DEA: 112N2354
EFIS: 1124000193
DIST-CO-RTE-PM11-SAN DIEGO-76-R8.1/R12.0
Award DateNot set
Closeout DateNot set
Work DescriptionRTE 76 REHAB - OCEANSIDE, 0.4 MI E OF MELROSE DR TO OLIVE HILL RD/CAMINO DEL REY (11-2N2354)
Location DescriptionNot set
QA Service Level1 (Verified on 09/01/2026)

Owner Lab

  • CT D11 - District 11 Materials Laboratory

Sample Information

Sample Taken Date09/08/2026 Sample Unique Key50
Date that the sample was received by the laboratory/organization performing the testing09/09/2026 Sample typeProduction Start-Up
A brief description of the sample3/4" HMA-A The quantity of what the sample constitutes12 boxes
From where was the sample collectedSupplier First name of sampler or witnessed byN/A
Last name of sampler or witnessed byN/A Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameAll American Asphalt Corona
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number105793
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder Supplier
RAP content (%)Not set WMA Additives
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-09-08-50-2AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/29/202609/29/2026
No
Not Applicable due to NO CORRECTION added . Once a factor is established a Correction Factor will be added . Saved Aggs for T-30
2026-09-08-50-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory10/01/202609/29/2026
Yes
10/06/2026Complies Target 4.3% ( +/- 1.5% )Public - Test Data Visible
2026-09-08-50-4AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/28/202609/28/2026
Yes
10/06/2026Complies Target 2.565 Gmm Tested 2.572 GmmPublic - Test Data Visible
2026-09-08-50-5AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/29/202609/29/2026
Yes
10/06/2026Complies Low to High Gmb within the 0.024 spec Public - Test Data Visible
2026-09-08-50-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory10/01/202610/01/2026
No
Complies Target WET> 70 psi and DRY > 100 psi . Tested WET - 120 psi and DRY 188 psi
2026-09-08-50-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory10/06/202610/06/2026
Yes
10/06/2026Complies Target < 12.7 mm - Tested an Avg of 1.73 mmPublic - Test Data Visible
2026-09-08-50-8AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Daniel Smith, CT D11 - District 11 Materials Laboratory10/01/202610/01/2026
No
Not Applicable - Requires the Correction Factor Added to get Final test result
2026-09-08-50-9CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory10/01/202610/01/2026
Yes
10/06/2026COMPLIESPublic - Test Data Visible
2026-09-08-50-10AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory10/01/202609/29/2026
Yes
10/06/2026RAP CompliesPublic - Test Data Visible
2026-09-08-50-11AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory10/01/202609/29/2026
Yes
10/06/2026RAP CompliesPublic - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-09-08-50-4 AASHTO T209-25 (Verified)
DIME Test ID: 2026-09-08-50-2 AASHTO T308-25
DIME Test ID: 2026-09-08-50-3 AASHTO T269-14 (Verified)
DIME Test ID: 2026-09-08-50-5 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-09-08-50-11 AASHTO T209-25 (Verified)
DIME Test ID: 2026-09-08-50-10 AASHTO T308-10 (Verified)
DIME Test ID: 2026-09-08-50-13 AASHTO T308-25 (Verified)
DIME Test ID: 2026-09-08-50-14 AASHTO T308-25 (Verified)
DIME Test ID: 2026-09-08-50-12 AASHTO T30-19 (Verified)
DIME Test ID: 2026-09-08-50-8 AASHTO T30-19
DIME Test ID: 2026-09-08-50-6 AASHTO T283-14
DIME Test ID: 2026-09-08-50-9 CTM 375-February 2012 (Verified)
DIME Test ID: 2026-09-08-50-7 CTM 389-19 (Verified)