DIME - Sample Record for DIME Sample ID 2026-09-22-8

DIME » All Projects » Project - DEA: 120J34U4 » Sample 2026-09-22-8 » Sample Details

Sample Record

DIME Sample ID 2026-09-22-8

Project Information

Project Identifiers	Project ID: 993446 DEA: 120J34U4 EFIS: 1218000034
DIST-CO-RTE-PM	12-ORA-55,55-29.6,R6.4/10.3
Award Date	05/27/2022
Closeout Date	Not set
Work Description	CONSTR BRIDGES, RW, SW, JPCP, HMA PVMT, DRAINAGE AND ELECT SYSTEMS.
Location Description	ORANGE COUNTY IN IRVINE, SANTA ANA, AND TUSTIN ON ROUTE 5 AT NEWPORT AVENUE UNDERCROSSING AND ON ROUTE 55 FROM 0.4 MILE NORTH OF ROUTE 55/405 SEPARATION TO 0.1 MILE SOUTH OF ROUTE 5/55 SEPARATION
QA Service Level	1 (Verified on 06/24/2022)

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

Sample Information

Sample Taken Date	09/22/2026	Sample Unique Key	8
Date that the sample was received by the laboratory/organization performing the testing	09/22/2026	Sample type	Verification
A brief description of the sample	1/2" HMA-A R25 0.75% LAS	The quantity of what the sample constitutes	4 Bags of Agg, 2 Bags of Combined RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	QC Vulcan
Last name of sampler or witnessed by	QC Vulcan	Title of sampler
Telephone number of sampler		Laboratory sample identification	0570A-26
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Vulcan Materials - Irwnindale
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2026-09-22-8-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	DM, CT D08 - Fontana Southern Regional Laboratory	09/23/2026	10/08/2026	Yes	10/09/2026	Combined Virgin Aggregate Gradation.	Public - Test Data Visible
2026-09-22-8-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	FO, CT D08 - Fontana Southern Regional Laboratory	09/24/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	DP, CT D08 - Fontana Southern Regional Laboratory	09/24/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	KE, CT D08 - Fontana Southern Regional Laboratory	09/28/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	David Tran, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	DP, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026		Public - Test Data Visible
2026-09-22-8-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	DP, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026	RAP Gradation After Ignition.	Public - Test Data Visible
2026-09-22-8-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	DP, CT D08 - Fontana Southern Regional Laboratory	09/26/2026	10/08/2026	Yes	10/09/2026	Combined Aggre Gradation with rap Aggre Gradation.	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2026-09-22-8-1 AASHTO T27-14 (Verified)
DIME Test ID: 2026-09-22-8-2 AASHTO T84-14 (Verified)
DIME Test ID: 2026-09-22-8-3 AASHTO T85-13 (Verified)
DIME Test ID: 2026-09-22-8-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2026-09-22-8-5 AASHTO T176-08 (Verified)
DIME Test ID: 2026-09-22-8-6 AASHTO T304-11 (Verified)
DIME Test ID: 2026-09-22-8-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2026-09-22-8-8 ASTM D4791-10 (Verified)
DIME Test ID: 2026-09-22-8-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2026-09-22-8-10 CTM 202-November 2011 (Verified)