DIME » All Projects » Project - DEA: 11431004 » Sample 2026-08-20-74 » Sample Details

Sample Record

DIME Sample ID 2026-08-20-74

Project Information

Project IdentifiersProject ID: 1001651
DEA: 11431004
EFIS: 1119000214
DIST-CO-RTE-PM11-SD-5-R49.3/R53.2
Award DateNot set
Closeout DateNot set
Work DescriptionADA CURB RAMPS AND REALIGNMENT OF MISSION AVE SB ON RAMP/NB OFF RAMP.
Location DescriptionSAN DIEGO COUNTY IN CARLSBAD AND OCEANSIDE FROM TAMARACK AVENUE OVERCROSSING TO MISSION AVENUE OVERCROSSING
QA Service Level1 (Verified on 10/01/2025)

Owner Lab

  • CT D11 - District 11 Materials Laboratory

Sample Information

Sample Taken Date08/20/2026 Sample Unique Key74
Date that the sample was received by the laboratory/organization performing the testing08/19/2026 Sample typeProduction Start-Up
A brief description of the samplePSU The quantity of what the sample constitutes12 boxes
From where was the sample collectedSupplier First name of sampler or witnessed byMohammed
Last name of sampler or witnessed byMasud Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameVulcan Escondido
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number220305 ESC VAL
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
2026-09-19: HMA Aggregates (Size 3/4"): Sieve Analysis With RAP22026-08-20-74-2

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-08-20-74-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/21/202609/21/2026
No
Does Not Comply - Target 4.70% - Tested 5.33 % Oven# 1
2026-08-20-74-2AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Shawn Rivers, CT D11 - District 11 Materials Laboratory09/24/202609/24/2026
Yes
09/25/2026N/APublic - Test Data Visible
2026-08-20-74-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/21/202609/21/2026
Yes
09/25/2026Complies Gmb from low to high within 0.024 GmbPublic - Test Data Visible
2026-08-20-74-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory09/24/202609/21/2026
Yes
09/25/2026Complies Target 4.0% ( +/- 1.5% ) Tested an Avg of 3.7%Public - Test Data Visible
2026-08-20-74-5CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory09/28/202609/28/2026
Yes
09/29/2026Complies Target < 12.7 mm - Tested an Avg of 3.62 mmPublic - Test Data Visible
2026-08-20-74-6AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/21/202609/21/2026
Yes
09/25/2026Complies Target 2.532 Gmm Tested 2.517 Gmm . Test is within the 0.019 spec Public - Test Data Visible
2026-08-20-74-7AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/24/202609/24/2026
Yes
10/01/2026Complies Target WET > 70. psi and DRY > 100 psi Public - Test Data Visible
2026-08-20-74-8AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory09/24/202609/24/2026
Yes
09/25/2026RAP CompliesPublic - Test Data Visible
2026-08-20-74-9AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory09/24/202609/24/2026
Yes
09/25/2026RAP CompliesPublic - Test Data Visible
2026-08-20-74-10AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory09/24/202609/24/2026
Yes
09/25/2026RAP CompliesPublic - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-08-20-74-6 AASHTO T209-12 (Verified)
DIME Test ID: 2026-08-20-74-1 AASHTO T308-10
DIME Test ID: 2026-08-20-74-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-08-20-74-4 AASHTO T269-14 (Verified)
DIME Test ID: 2026-08-20-74-7 AASHTO T283-14 (Verified)
DIME Test ID: 2026-08-20-74-9 AASHTO T209-25 (Verified)
DIME Test ID: 2026-08-20-74-2 AASHTO T30-19 (Verified)
DIME Test ID: 2026-08-20-74-8 AASHTO T308-10 (Verified)
DIME Test ID: 2026-08-20-74-10 AASHTO T308-10 (Verified)
DIME Test ID: 2026-08-20-74-11 AASHTO T308-10 (Verified)
DIME Test ID: 2026-08-20-74-5 CTM 389-19 (Verified)
DIME Test ID: 2026-08-20-74-12 AASHTO T308-10