DIME - Sample Record for DIME Sample ID 2026-07-30-107

DIME » All Projects » Project - DEA: 11430194 » Sample 2026-07-30-107 » Sample Details

Sample Record

DIME Sample ID 2026-07-30-107

Project Information

Project Identifiers	Project ID: 1000703 DEA: 11430194 EFIS: 1118000001
DIST-CO-RTE-PM	11-SD-15-0.4/R10.2
Award Date	04/16/2025
Closeout Date	Not set
Work Description	CULVERT RESTORATION, TUNNEL CO MONITORING SYSTEM, & ADA RAMP.
Location Description	SAN DIEGO COUNTY IN SAN DIEGO FROM 0.2 MILE SOUTH OF ROUTE 5/15 SEPARATION TO 0.4 MILE SOUTH OF ROUTE 52/15 SEPARATION.
QA Service Level	1 (Verified on 07/23/2025)

Owner Lab

CT D11 - District 11 Materials Laboratory

Sample Information

Sample Taken Date	07/30/2026	Sample Unique Key	107
Date that the sample was received by the laboratory/organization performing the testing	07/31/2026	Sample type	Production Start-Up
A brief description of the sample	Reduced PSU	The quantity of what the sample constitutes	12 boxes
From where was the sample collected	Supplier	First name of sampler or witnessed by	Gerardo
Last name of sampler or witnessed by	Cordero	Title of sampler
Telephone number of sampler		Laboratory sample identification
Linked DIME Sample ID		The fabricator/manufacturer/facility name	MM Lakeside
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1/2 inch	Lot number
Sublot number		HMA Mix Number	21217105 MM
Binder content (%)	0.0	Virgin binder PG
Design binder PG		Binder Supplier
RAP content (%)	0	WMA Additives
Antistrip type

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2026-07-30-107-3	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	09/14/2026	09/14/2026	Yes	09/14/2026	RAP	Public - Test Data Visible
2026-07-30-107-4	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Daniel Paul Smith, CT D11 - District 11 Materials Laboratory	09/14/2026	09/14/2026	Yes	09/14/2026	Complies Target 2.472 Tested 2 times 1-st 2.492 and 2nd-2.476 . These 2 test comply with the spec of 0.019	Public - Test Data Visible
2026-07-30-107-5	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/10/2026	09/16/2026	Yes	09/18/2026	Complies Used oven 3 - Target 5.25% - Tested 5.74 %	Public - Test Data Visible
2026-07-30-107-6	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Ben Haney, CT D11 - District 11 Materials Laboratory	09/14/2026	09/14/2026	Yes	09/14/2026	Complies Target 4.0% (+/- 1.5%) . Tested Avg of 5.2%	Public - Test Data Visible
2026-07-30-107-7	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Daniel Paul Smith, CT D11 - District 11 Materials Laboratory	08/30/2026	09/14/2026	Yes	09/14/2026	Low to High Gmb within 0.024 . Tested Low to High at 0.012 Gmb	Public - Test Data Visible
2026-07-30-107-9	CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt	Daniel Paul Smith, CT D11 - District 11 Materials Laboratory	09/01/2026	09/14/2026	Yes	09/14/2026	Complies Target < 12.7 mm - Tested Avg of 2.45 mm	Public - Test Data Visible
2026-07-30-107-10	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Daniel Paul Smith, CT D11 - District 11 Materials Laboratory	09/03/2026	09/14/2026	Yes	09/14/2026	Complies Target DRY > 70 psi and DRY > 100 psi	Public - Test Data Visible
2026-07-30-107-11	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/23/2026	09/23/2026	No		Use Oven #4 Does NOT Comply Target 5.25% - Tested 5.85%

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2026-07-30-107-3 AASHTO T308-10 (Verified)
DIME Test ID: 2026-07-30-107-4 AASHTO T209-12 (Verified)
DIME Test ID: 2026-07-30-107-5 AASHTO T308-10 (Verified)
DIME Test ID: 2026-07-30-107-6 AASHTO T269-14 (Verified)
DIME Test ID: 2026-07-30-107-7 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-07-30-107-9 CTM 389-19 (Verified)
DIME Test ID: 2026-07-30-107-10 AASHTO T283-14 (Verified)
DIME Test ID: 2026-07-30-107-11 AASHTO T308-10