Sample Record
DIME Sample ID 2026-09-02-44
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1002614 DEA: 081K6304 EFIS: 0819000083 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-18-T6.0/9.1 |
| Award Date | 05/15/2025 |
| Closeout Date | Not set |
| Work Description | CONSTRUCTION ON STATE HIGHWAY IN SAN BERNARDINO COUNTY IN SAN BERNARDINO FROM 29TH STREET TO 0.2 MILE SOUTH OF OLD WATERMAN CANYON ROAD. |
| Location Description | SAN BERNARDINO COUNTY IN THE CITY OF SAN BERNARDINO ON WATERMAN AVE |
| QA Service Level | 1 (Verified on 09/04/2026) |
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
Sample Information
| Sample Taken Date | 09/02/2026 | Sample Unique Key | 44 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/08/2026 | Sample type | Verification |
| A brief description of the sample | 3/4 " HMA-A R20 0.5% LAS | The quantity of what the sample constitutes | 4 Bags of Cold Feed, 2 Bags of RAP - Coarse, 2 Bags of RAP - Fine |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | MaryAnna |
| Last name of sampler or witnessed by | Landaverde | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 0555A-26 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Matich Corporation — Lytle Creek Plant | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0040 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-09-02-44-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | DM, CT D08 - Fontana Southern Regional Laboratory | 09/04/2026 | 09/21/2026 | No | combined Virgin Aggregate Gradation. | |||
| 2026-09-02-44-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 09/09/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | DP, CT D08 - Fontana Southern Regional Laboratory | 09/09/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | KE/FO, CT D08 - Fontana Southern Regional Laboratory | 09/08/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | RB, CT D08 - Fontana Southern Regional Laboratory | 09/09/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 09/08/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 09/08/2026 | 09/21/2026 | No | ||||
| 2026-09-02-44-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 09/08/2026 | 09/21/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-09-02-44-1 AASHTO T27-14
DIME Test ID: 2026-09-02-44-2 AASHTO T84-14
DIME Test ID: 2026-09-02-44-3 AASHTO T85-13
DIME Test ID: 2026-09-02-44-4 AASHTO T96-02r10
DIME Test ID: 2026-09-02-44-5 AASHTO T176-08
DIME Test ID: 2026-09-02-44-6 AASHTO T304-11
DIME Test ID: 2026-09-02-44-7 AASHTO T335-09r13
DIME Test ID: 2026-09-02-44-8 ASTM D4791-10