DIME » All Projects » Project - DEA: 11430344 » Sample 2026-08-19-64 » Sample Details

Sample Record

DIME Sample ID 2026-08-19-64

Project Information

Project IdentifiersProject ID: 1001687
DEA: 11430344
EFIS: 1118000104
DIST-CO-RTE-PM11-SD-5,54,94,125-Var
Award DateNot set
Closeout DateNot set
Work DescriptionCULVERTS RESTORATION, RHMA, JPCP, ISR, BARRIER, LANDSCAPE, ELECTRICAL.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS
QA Service Level1 (Verified on 02/05/2026)

Owner Lab

  • CT D11 - District 11 Materials Laboratory

Sample Information

Sample Taken Date08/19/2026 Sample Unique Key64
Date that the sample was received by the laboratory/organization performing the testing07/16/2026 Sample typeQuality Assurance
A brief description of the samplePlant Sample The quantity of what the sample constitutes4 boxes
From where was the sample collectedSupplier First name of sampler or witnessed byGerardo
Last name of sampler or witnessed byCordero Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameMM Lakeside
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number23418180T3
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder Supplier
RAP content (%)0 WMA Additives
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-08-19-64-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/10/202609/10/2026
Yes
09/15/2026CompliesPublic - Test Data Visible
2026-08-19-64-3AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/10/202609/10/2026
Yes
09/11/2026N/A - Complies Target 2.449 - Tested 2.431 . Within 0.019Public - Test Data Visible
2026-08-19-64-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/10/202609/10/2026
Yes
09/11/2026Complies Target Gmb from low to high between 0.024 Gmb Tested Low-2.340 Gmb and High-2.357 GmbPublic - Test Data Visible
2026-08-19-64-5AASHTO T269-24E25: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory09/10/202609/10/2026
Yes
09/11/2026Complies Target 4.0% ( +/- 1.5% ) Tested an Avg of 3.4%Public - Test Data Visible
2026-08-19-64-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory09/16/202609/16/2026
Yes
09/17/2026Complies Target < 12.7 mm - Tested an Avg of 2.19 mmPublic - Test Data Visible
2026-08-19-64-8AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Daniel Smith, CT D11 - District 11 Materials Laboratory09/15/202609/15/2026
Yes
09/15/2026Complies per Mix Design 35-11 Page 4Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-08-19-64-2 AASHTO T308-10 (Verified)
DIME Test ID: 2026-08-19-64-3 AASHTO T209-25 (Verified)
DIME Test ID: 2026-08-19-64-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-08-19-64-5 AASHTO T269-24E25 (Verified)
DIME Test ID: 2026-08-19-64-6 CTM 389-19 (Verified)
DIME Test ID: 2026-08-19-64-8 AASHTO T30-19 (Verified)