Sample Record
Owner Lab
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2026-06-15-102
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001609 DEA: 040AA244 EFIS: 0419000455 |
|---|---|
| DIST-CO-RTE-PM | 04-CC, -680-R0.0/R7.7 |
| Award Date | 12/18/2025 |
| Closeout Date | Not set |
| Work Description | INDIVIDUAL SLAB REPLACEMENT, COLD PLAN AC PVMT, GRIND EXIST CONC PVMT. |
| Location Description | CONTRA COSTA COUNTY IN SAN RAMON AND DANVILLE FROM THE ALAMEDA COUNTY LINE TO 0.2 MILE NORTH OF DIABLO ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 10/06/2025) |
Sample Information
| Sample Taken Date | 06/15/2026 | Sample Unique Key | 102 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 07/07/2026 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4"HMA w/25% RAP |
| The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Source |
| First name of sampler or witnessed by | Dennis | Last name of sampler or witnessed by | Yeung |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D04-SE-26-023 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Pleasanton Plant | Transportation Laboratory (TL) Number | CPL061526 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant Sampler | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 220304 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-06-15-102-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Nicholas Shelly - BSK, CT D04 - Hayward DME / District Laboratory | 07/09/2026 | 08/20/2026 | No | Coarse, 2 faced=99.8%, Coarse, 1 faced=100%, Fine, 1 faced=100% | |||
| 2026-06-15-102-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Nicholas Shelly - BSK, CT D04 - Hayward DME / District Laboratory | 07/09/2026 | 08/20/2026 | No | Grading B, 100 revolutions= 4.9%, 500 revolutions= 20.0% | |||
| 2026-06-15-102-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Nicholas Shelly - BSK, CT D04 - Hayward DME / District Laboratory | 07/09/2026 | 08/20/2026 | No | Average uncompacted voids= 44.9% | |||
| 2026-06-15-102-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Nicholas Shelly - BSK, CT D04 - Hayward DME / District Laboratory | 07/09/2026 | 08/20/2026 | No | Flat and elongated particles=0% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-06-15-102-1 AASHTO T335-09r13
DIME Test ID: 2026-06-15-102-2 AASHTO T96-02r10
DIME Test ID: 2026-06-15-102-3 AASHTO T304-11
DIME Test ID: 2026-06-15-102-4 ASTM D4791-10