DIME » All Projects » Project - DIME:213087 » Sample 2018-04-24-32 » Sample Details

Sample Record

DIME Sample ID 2018-04-24-32

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213087
Permit Numbers: 0916NCS0245 0917NDP0279 0917NRW0191
DIST-CO-RTE-PM09-KER-14-16.3/17.1
Award Date12/29/2016
Closeout Date06/23/2021
Work DescriptionConstruct sidewalk, curb and gutter, as shown on the plans titled "Plans for Construction of Pedestrian Path Improvements on State Route 14 in Mojave, CA, Contract No. 16007" signed and stamped by Registered Civil Engineer Bryon A. Smith, RCE No. 61252.Notwithstanding General Provision #4,
Location DescriptionMojave, Mojave
QA Service Level1 (Verified on 02/01/2018)

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

Sample Information

Sample Taken Date04/24/2018 Sample Unique Key32
Date that the sample was received by the laboratory/organization performing the testing05/01/2018 Sample typeQuality Assurance
A brief description of the sampleF1554 Gr 105 Anchor bolt assembly The quantity of what the sample constitutes1
From where was the sample collectedDistributor First name of sampler or witnessed byDave
Last name of sampler or witnessed byFlygare Title of samplerQC and Safety assistant
Telephone number of samplerUnknown Laboratory sample identificationUnknown
Linked DIME Sample IDUnknown The fabricator/manufacturer/facility nameEnsco
Transportation Laboratory (TL) NumberC719150 Inspector Lot Number from the Transportation Laboratory (TL) FormB76-078-18
Structure unique identifierNot set Structure nameNot set
Bid ItemNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)M42681, DL17101378, 175125, DL12102282 Nut Mfg. Lot Number(s)393694A, DL1710137801, 325719B, DL1210228201
Washer Mfg. Lot Number(s)1017-672 Bolt SpecificationF1554 Gr105
Bolt Length(s)3'-4" Nut SpecificationA194 Gr2H
Washer SpecificationF436 FinishHDG
Diameter/Size1" Bolt Mfg. Lot Number78641
Rocap Test Requirement(s) Lubricant Requirements(s)
Washer Inner Diameter(s) Bolt Mill SupplierNot set
Nut Mill SupplierNot set Washer Mill SupplierNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2018-04-24-32-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory05/03/201805/03/2018
Yes
05/17/2018Nut ProofPublic - Test Data Visible
2018-04-24-32-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory05/03/201805/03/2018
Yes
05/17/2018Loop FailurePublic - Test Data Visible
2018-04-24-32-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory05/03/201805/03/2018
Yes
05/17/2018Nut ProofPublic - Test Data Visible
2018-04-24-32-4ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory05/03/201805/03/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-5ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)Brian, CT HQ - Sacramento Structural Materials Testing Laboratory05/03/201805/03/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory05/08/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-7ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory05/08/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory05/08/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory05/08/2018
Yes
05/17/2018Public - Test Data Visible
2018-04-24-32-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory05/08/2018
Yes
05/17/2018Public - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-04-24-32-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-4 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-24-32-5 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-24-32-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-11 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-12 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-13 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-14 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-15 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-16 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-24-32-17 ASTM E18-15 (Verified)