Sample Record
Owner Labs
- CT HQ - Vallejo Field Laboratory
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2026-08-12-1
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 993812 DEA: 11431274 EFIS: 1121000129 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R0.3/R36.0 |
| Award Date | 01/28/2025 |
| Closeout Date | Not set |
| Work Description | CMGC Project- Restore the pavement to a state of good repair through roadway rehabilitation, pavement preservation, drainage restoration, transportation management system upgrades, and American with Disabilities Act (ADA) infrastructure improvements. |
| Location Description | SD County |
| QA Service Level | 1 (Verified on 09/19/2022) |
Sample Information
| Sample Taken Date | 08/12/2026 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 08/18/2026 |
| Sample type | Quality Assurance | A brief description of the sample | .63x6.0" |
| The quantity of what the sample constitutes | 500 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Kevin M | Last name of sampler or witnessed by | Carpenter |
| Title of sampler | Quality Assurance Inspector | Telephone number of sampler | 415-608-1742 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Ameron | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B24-268-26 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | 58068850 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | ASTM A449 |
| Bolt Length(s) | 6.0" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | HDG |
| Diameter/Size | .63" | Bolt Mfg. Lot Number | 67566 |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | galvanized |
| Washer Inner Diameter(s) | 0 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-08-12-1-1 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/20/2026 | 08/20/2026 | No | ||||
| 2026-08-12-1-2 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/20/2026 | 08/20/2026 | No | ||||
| 2026-08-12-1-3 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/20/2026 | 08/20/2026 | No | ||||
| 2026-08-12-1-4 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2026 | 08/28/2026 | No | ||||
| 2026-08-12-1-5 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2026 | 08/28/2026 | No | ||||
| 2026-08-12-1-6 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2026 | 08/28/2026 | No | ||||
| 2026-08-12-1-7 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/28/2026 | 08/28/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-08-12-1-1 ASME B1.2-83r17
DIME Test ID: 2026-08-12-1-2 ASME B1.2-83r17
DIME Test ID: 2026-08-12-1-3 ASME B1.2-83r17
DIME Test ID: 2026-08-12-1-4 ASTM B499-09r21
DIME Test ID: 2026-08-12-1-5 ASTM B499-09r21
DIME Test ID: 2026-08-12-1-6 ASTM B499-09r21
DIME Test ID: 2026-08-12-1-7 ASTM F606-21