Sample Record
Owner Lab
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2026-05-12-74
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001683 DEA: 040AA194 EFIS: 0419000450 |
|---|---|
| DIST-CO-RTE-PM | 04-CC-4-R29.0/R44.4 |
| Award Date | 01/09/2026 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT, RHMA-G & HMA OVERLAY, REPLACE AC SURF, & MGS. |
| Location Description | CONTRA COSTA COUNTY IN ANTIOCH AND AT BYRON FROM HILLCREST AVENUE OVERCROSSING TO BYRON HIGHWAY |
| QA Service Level | 1 (Verified on 10/06/2025) |
Sample Information
| Sample Taken Date | 05/12/2026 | Sample Unique Key | 74 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 06/18/2026 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2" HMA-A + 25% RAP |
| The quantity of what the sample constitutes | 3 Bags Combined Aggregate | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cody | Last name of sampler or witnessed by | Cordero |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D04-SE-26-016 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Teichert Materials Vernalis | Transportation Laboratory (TL) Number | CON-051226-1 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0041 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyer Belt-HMA Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 302 40442436 P |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-05-12-74-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 06/22/2026 | 08/12/2026 | No | Coarse, 2 faced=99.2%, Coarse, 1 faced=99.7%, Fine, 1 faced=99.6% | |||
| 2026-05-12-74-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 06/23/2026 | 08/12/2026 | No | Grading C, 100 revolutions= 5.1%, 500 revolutions= 21.9% | |||
| 2026-05-12-74-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 06/22/2026 | 08/12/2026 | No | Average uncompacted voids= 44.1% | |||
| 2026-05-12-74-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | M. Paulson - Kleinfelder-Hayward, CT D04 - Hayward DME / District Laboratory | 06/22/2026 | 08/12/2026 | No | Flat and elongated particles=2% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-05-12-74-1 AASHTO T335-09r13
DIME Test ID: 2026-05-12-74-2 AASHTO T96-02r10
DIME Test ID: 2026-05-12-74-3 AASHTO T304-11
DIME Test ID: 2026-05-12-74-4 ASTM D4791-10