Sample Record
Owner Lab
- CT HQ - QASI Los Angeles Field Office
DIME Sample ID 2026-08-10-7
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001197 DEA: 07319604 EFIS: 0716000025 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-1,101-21.3/21.9,R34.9/R36.1 |
| Award Date | 09/16/2025 |
| Closeout Date | Not set |
| Work Description | REMOVE AND CONSTRUCT BRIDGE. |
| Location Description | VENTURA COUNTY ON ROUTE 1 FROM 1.8 MILES NORTH OF ROUTE 1/33 SEPARATION TO 2.0 MILES SOUTH OF A LEASE CANYON ROAD AND ON ROUTE 101 FROM 0.4 MILE NORTH OF DULAH ROAD UNDERCROSSING TO SAN MIGUELITO ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 07/01/2025) |
Sample Information
| Sample Taken Date | 08/10/2026 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 08/14/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 1" x 40" Gr 105 Double End Stud Anchor Bolts |
| The quantity of what the sample constitutes | 303 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Jayce | Last name of sampler or witnessed by | Groves |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Halo | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | Bolt, A254986 Nut, 1000234596 Washer, 190250877 | Nut Mfg. Lot Number(s) | 1000234596 |
| Washer Mfg. Lot Number(s) | 190250877 | Bolt Specification | F1554 Gr 105 |
| Bolt Length(s) | 40" | Nut Specification | A563 |
| Washer Specification | F436 | Finish | Galvanized |
| Diameter/Size | 1" | Bolt Mfg. Lot Number | A254986 |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | No |
| Washer Inner Diameter(s) | One point three inches |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-08-10-7-1 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/18/2026 | 08/18/2026 | No | ||||
| 2026-08-10-7-2 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/18/2026 | 08/18/2026 | No | ||||
| 2026-08-10-7-3 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 08/18/2026 | 08/18/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-08-10-7-1 ASME B1.2-83r17
DIME Test ID: 2026-08-10-7-2 ASME B1.2-83r17
DIME Test ID: 2026-08-10-7-3 ASME B1.2-83r17