Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-04-18-3
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 212886 DEA: 023H1204 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-5-R0.0/R22.4 |
| Award Date | 01/03/2018 |
| Closeout Date | 02/06/2019 |
| Work Description | COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR |
| Location Description | TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE |
| QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
| Sample Taken Date | 04/18/2018 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/19/2018 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4 Treated Virgin Aggregate |
| The quantity of what the sample constitutes | PSE | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Allegretto |
| Title of sampler | Lab Tech | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77334 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Tullis Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | T101 C896052 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C896052 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 Cold feed and rap | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2018-04-18-3-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 04/20/2018 | Terry McCormick | No | PSE, 3/4 Cold Feed | Info | |
| 2018-04-18-3-2 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 04/23/2018 | Terry McCormick | No | PSE, Rap extraction grading | Info | |
| 2018-04-18-3-3 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 04/23/2018 | Terry McCormick | No | PSE, Rap rice | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-04-18-3-1 AASHTO T27-14
DIME Test ID: 2018-04-18-3-2 AASHTO T27-14
DIME Test ID: 2018-04-18-3-3 AASHTO T209-12