Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-07-12-15

Project Information

Project IdentifiersProject ID: 1000320
DEA: 11430324
EFIS: 1118000102
DIST-CO-RTE-PM11-SD-805-14.6/23.7
Award Date08/23/2024
Closeout DateNot set
Work DescriptionMODIFY ELECTRICAL, CONCRETE PAVEMENT, DRAINAGE AND SIGNS.
Location DescriptionSAN DIEGO COUNTY IN SAN DIEGO FROM ROUTE 805/15 SEPARATION TO 0.1 MILE NORTH OF ROUTE 805/52 SEPARATION
QA Service Level1 (Verified on 09/09/2024)

Sample Information

Sample Taken Date07/12/2026 Sample Unique Key15
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/13/2026
Sample typeProduction Start-Up A brief description of the samplePSU
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byMohammed Last name of sampler or witnessed byMasud
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMartin Marietta Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number23418180AH
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-07-12-15-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory08/18/202608/18/2026
Yes
08/19/2026Complies Target 7.50 % Tested 7.24%Public - Test Data Visible
2026-07-12-15-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory08/19/202608/19/2026
Yes
08/19/2026Complies with Gmb spec Low at 2.407 and High at 2.410 . Wihin 0.024 / Low to HighPublic - Test Data Visible
2026-07-12-15-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory08/19/202608/19/2026
Yes
08/19/2026Does Not Comply - Target 4.0% ( +/- 1.5% ) Tested an Avg of 1.8 % Public - Test Data Visible
2026-07-12-15-4AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory08/18/202608/18/2026
Yes
08/19/2026Complies Target 2.449 Tested 2.452Public - Test Data Visible
2026-07-12-15-5CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory08/25/202608/25/2026
Yes
08/26/2026Complies Target < 12.7 mm tested an Avg of 7.20 mmPublic - Test Data Visible
2026-07-12-15-6CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory08/07/202608/11/2026
Yes
08/19/2026CompliesPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-07-12-15-1 AASHTO T308-10 (Verified)
DIME Test ID: 2026-07-12-15-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-07-12-15-3 AASHTO T269-14 (Verified)
DIME Test ID: 2026-07-12-15-4 AASHTO T209-12 (Verified)
DIME Test ID: 2026-07-12-15-5 CTM 389-19 (Verified)
DIME Test ID: 2026-07-12-15-6 CTM 375-February 2012 (Verified)