Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2026-07-23-34
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994586 DEA: 081C08U4 EFIS: 0822000142 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-R134.0/R156.5 |
| Award Date | 06/22/2023 |
| Closeout Date | Not set |
| Work Description | PLACE HMA (TYPE A), JPCP, IMPORTED BORROW, ROADWAY EXCAVATION & CL2 AB |
| Location Description | RIVERSIDE COUNTY FROM 1.1 MILES WEST OF WILEY WELL ROAD OVERCROSSING TO CALIFORNIA/ARIZONA STATE LINE |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 07/23/2026 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/27/2026 |
| Sample type | Production Start-Up | A brief description of the sample | PSU 3/4" HMA-A-SP R24, 1.0% LSM |
| The quantity of what the sample constitutes | 2 bags Virgin Agg:3/4", 3/8", Sand-ea, 2 bags of Marinated Comb. 2 Bags of RAP (1 fine, 1Coarce) | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Alberto | Last name of sampler or witnessed by | Pineda-Gonzalez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0445A-26 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Fisher Sand and Gravel -Tempe | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | CM203 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-07-23-34-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | D.Lowe, CT D08 - Fontana Southern Regional Laboratory | 07/29/2026 | 08/07/2026 | No | Combined Virgin Aggregate Gradation. | |||
| 2026-07-23-34-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 07/31/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | DM, CT D08 - Fontana Southern Regional Laboratory | 07/30/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | KE/FO, CT D08 - Fontana Southern Regional Laboratory | 07/31/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | JE, CT D08 - Fontana Southern Regional Laboratory | 07/31/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 08/01/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 08/01/2026 | 08/07/2026 | No | ||||
| 2026-07-23-34-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | DP, CT D08 - Fontana Southern Regional Laboratory | 08/01/2026 | 08/07/2026 | No | Rap Gradation After Ignition. | |||
| 2026-07-23-34-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | DP, CT D08 - Fontana Southern Regional Laboratory | 08/01/2026 | 08/07/2026 | No | Combined Aggregate Gradation With Rap Aggregate Gradation. | |||
| 2026-07-23-34-11 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 08/01/2026 | 08/07/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-07-23-34-1 AASHTO T27-14
DIME Test ID: 2026-07-23-34-2 AASHTO T84-14
DIME Test ID: 2026-07-23-34-3 AASHTO T85-13
DIME Test ID: 2026-07-23-34-4 AASHTO T96-02r10
DIME Test ID: 2026-07-23-34-5 AASHTO T176-08
DIME Test ID: 2026-07-23-34-7 AASHTO T335-09r13
DIME Test ID: 2026-07-23-34-8 ASTM D4791-10
DIME Test ID: 2026-07-23-34-9 CTM 202-November 2011
DIME Test ID: 2026-07-23-34-10 CTM 202-November 2011
DIME Test ID: 2026-07-23-34-11 AASHTO T304-11