DIME - Sample Record for DIME Sample ID 2026-07-13-26

DIME » All Projects » Project - DEA: 11430264 » Sample 2026-07-13-26 » Sample Details

Sample Record

Owner Lab

CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-07-13-26

Project Information

Project Identifiers	Project ID: 1001686 DEA: 11430264 EFIS: 1118000083 COOP: NONE
DIST-CO-RTE-PM	11-SD-94,188-15.2/65.3,0.0/1.9
Award Date	Not set
Closeout Date	Not set
Work Description	DRAINAGE RESTORATION, ADA CURB RAMPS & COMPLETE STREET.
Location Description	SAN DIEGO COUNTY ABOUT 6 MILES EAST OF LEMON GROVE ON ROUTE 94 FROM SWEETWATER RIVER BRIDGE TO AVENUE DE ROBLES VERDES NEAR MANZANITA AND ON ROUTE 188 FROM MEXICO BORDER NEAR TECATE TO ROUTE 94.
QA Service Level	1 (Verified on 02/05/2026)

Sample Information

Sample Taken Date	07/13/2026	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/13/2026
Sample type	Verification	A brief description of the sample	JMFR
The quantity of what the sample constitutes	12 boxes	From where was the sample collected	Supplier
First name of sampler or witnessed by	Gerardo	Last name of sampler or witnessed by	Cordero
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Martin Marietta Lakeside	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1-1/2 inch	Lot number
Sublot number		HMA Mix Number	21517070
Binder content (%)	0.0	Virgin binder PG
Design binder PG		Binder Supplier	Valero
RAP content (%)	0	WMA Additives	No
Antistrip type

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2026-07-13-26-1	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/22/2026	07/22/2026	Yes	07/27/2026	Complies Target 2.530 - Tested 2.529	Public - Test Data Visible
2026-07-13-26-2	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/22/2026	07/22/2026	Yes	07/27/2026	Complies Low to High within 0.024 Gmb	Public - Test Data Visible
2026-07-13-26-3	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/22/2026	07/22/2026	Yes	07/27/2026	Complies Target 5.0% (+/-) 1.5% tested an Avg of 4.8%	Public - Test Data Visible
2026-07-13-26-4	CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/23/2026	07/23/2026	Yes	07/27/2026	Complies Target <12.7 mm tested an Avg of 8.65 mm	Public - Test Data Visible
2026-07-13-26-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/31/2026	07/28/2026	Yes	07/30/2026	Complies WET Target > 70 psi and DRY Target > 100 psi / Tested WET- 90 psi and DRY - 127 psi	Public - Test Data Visible
2026-07-13-26-6	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/27/2026	07/27/2026	Yes	08/04/2026	Complies	Public - Test Data Visible
2026-07-13-26-9	THIS TEST HAS BEEN SUPERSEDED. AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Daniel Smith, CT D11 - District 11 Materials Laboratory	07/24/2026	07/28/2026	Yes	08/04/2026	THIS TEST HAS BEEN SUPERSEDED. Does not Comply	Public - Test Data Visible
2026-07-13-26-11	AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Melchor Oronoz, CT D11 - District 11 Materials Laboratory	08/04/2026	08/04/2026	Yes	08/04/2026	Complies with target values.	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2026-07-13-26-1 AASHTO T209-12 (Verified)
DIME Test ID: 2026-07-13-26-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-07-13-26-3 AASHTO T269-14 (Verified)
DIME Test ID: 2026-07-13-26-4 CTM 389-19 (Verified)
DIME Test ID: 2026-07-13-26-5 AASHTO T283-14 (Verified)
DIME Test ID: 2026-07-13-26-6 AASHTO T308-10 (Verified)
DIME Test ID: 2026-07-13-26-9 AASHTO T30-19 (Verified)
DIME Test ID: 2026-07-13-26-11 AASHTO T30-19 (Verified)