Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2026-06-12-73
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1002057 DEA: 120V2404 EFIS: 1224000109 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-405-3.9/23.3 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Apply methacrylate, polyester concrete overlay, and deck spall repair. |
| Location Description | ORANGE COUNTY AT VARIOUS LOCATIONS FROM UNIVERSITY DRIVE OVERCROSSING TO N405-W22 CONNECTOR SEPARATION |
| QA Service Level | 1 (Verified on 04/02/2026) |
Sample Information
| Sample Taken Date | 06/12/2026 | Sample Unique Key | 73 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/14/2026 |
| Sample type | Verification | A brief description of the sample | 1/2" WMA-A 15R 0.4% LAS |
| The quantity of what the sample constitutes | JMF Verification, 4 Bags of Combined Aggregate, 2 Bags of Combined RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Victor | Last name of sampler or witnessed by | Victor QC |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | 0350A-26 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | AAA - Perris | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | 102775 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-06-12-73-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | EJ, CT D08 - Fontana Southern Regional Laboratory | 07/14/2026 | 07/20/2026 | No | Combined Virgin Aggregate Gradation. | |||
| 2026-06-12-73-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 07/15/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | DP, CT D08 - Fontana Southern Regional Laboratory | 07/15/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | KE/FO, CT D08 - Fontana Southern Regional Laboratory | 07/18/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | KE, CT D08 - Fontana Southern Regional Laboratory | 07/15/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 07/18/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 07/18/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | DP, CT D08 - Fontana Southern Regional Laboratory | 07/18/2026 | 07/20/2026 | No | ||||
| 2026-06-12-73-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Amir Sarder, CT D08 - Fontana Southern Regional Laboratory | 07/14/2026 | 07/20/2026 | No | RAP Gradation After Ignition. | |||
| 2026-06-12-73-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | EJ, CT D08 - Fontana Southern Regional Laboratory | 07/14/2026 | 07/20/2026 | No | Combined Aggregate Gradation With RAP Aggregate Gradation. |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-06-12-73-1 AASHTO T27-14
DIME Test ID: 2026-06-12-73-2 AASHTO T84-14
DIME Test ID: 2026-06-12-73-3 AASHTO T85-13
DIME Test ID: 2026-06-12-73-4 AASHTO T96-02r10
DIME Test ID: 2026-06-12-73-5 AASHTO T176-08
DIME Test ID: 2026-06-12-73-6 AASHTO T304-11
DIME Test ID: 2026-06-12-73-7 AASHTO T335-09r13
DIME Test ID: 2026-06-12-73-8 ASTM D4791-10
DIME Test ID: 2026-06-12-73-9 CTM 202-November 2011
DIME Test ID: 2026-06-12-73-10 CTM 202-November 2011