Sample Record
Owner Lab
- Kie-Con, Incorporated - Antioch
DIME Sample ID 2026-06-08-49
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001123 DEA: 051H4704 EFIS: 0516000078 |
|---|---|
| DIST-CO-RTE-PM | 05-SCR-9-9-13.6,15.5 |
| Award Date | 09/05/2025 |
| Closeout Date | Not set |
| Work Description | REPLACE BRIDGES AND INSTALL MGS. |
| Location Description | SANTA CRUZ COUNTY NEAR BOULDER CREEK AT SAN LORENZO RIVER BRIDGE AND AT KINGS CREEK BRIDGE |
| QA Service Level | 1 (Verified on 04/10/2025) |
Sample Information
| Sample Taken Date | 06/08/2026 | Sample Unique Key | 49 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/08/2026 |
| Sample type | Quality Control | A brief description of the sample | 1/2in Coarse Aggregate |
| The quantity of what the sample constitutes | 42 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Jason | Last name of sampler or witnessed by | Allen |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Kie-Con Antioch | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-07-0003 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-06-08-49-1 | ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates | Jason Allen, Kie-Con, Incorporated - Antioch | 06/08/2026 | 06/30/2026 | No | ||||
| 2026-06-08-49-2 | ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate | Jason Allen, Kie-Con, Incorporated - Antioch | 06/08/2026 | 06/30/2026 | No | ||||
| 2026-06-08-49-3 | ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | Jason Allen, Kie-Con, Incorporated - Antioch | 06/08/2026 | 06/30/2026 | No | ||||
| 2026-06-08-49-4 | ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying | Jason Allen, Kie-Con, Incorporated - Antioch | 06/08/2026 | 06/30/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-06-08-49-1 ASTM C136-19
DIME Test ID: 2026-06-08-49-2 ASTM D2419-14
DIME Test ID: 2026-06-08-49-3 ASTM C117-17
DIME Test ID: 2026-06-08-49-4 ASTM C566-19