Sample Record
Owner Lab
- CT HQ - Vallejo Field Laboratory
DIME Sample ID 2026-06-16-29
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.2/R17.8 |
| Award Date | 02/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM |
| QA Service Level | 1 (Verified on 09/30/2024) |
Sample Information
| Sample Taken Date | 06/16/2026 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 06/26/2026 |
| Sample type | Stock | A brief description of the sample | 5/8"x 3.0" A325 Bolts |
| The quantity of what the sample constitutes | 800 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Carpenter |
| Title of sampler | Quality Assurance Inspector | Telephone number of sampler | 415-608-1742 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | UIS | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B24-150-26 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | BM0273 | Nut Mfg. Lot Number(s) | xxx |
| Washer Mfg. Lot Number(s) | xxx | Bolt Specification | A325 |
| Bolt Length(s) | 3.0" | Nut Specification | xxx |
| Washer Specification | xxx | Finish | MG |
| Diameter/Size | 5/8" | Bolt Mfg. Lot Number | BM0273 |
| Rocap Test Requirement(s) | xxx | Lubricant Requirements(s) | xxx |
| Washer Inner Diameter(s) | xxx |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2026-06-16-29-1 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Jereme Morgan, CT HQ - Sacramento Structural Materials Testing Laboratory | 06/26/2026 | 06/26/2026 | No | ||||
| 2026-06-16-29-2 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Jereme Morgan, CT HQ - Sacramento Structural Materials Testing Laboratory | 06/26/2026 | 06/26/2026 | No | ||||
| 2026-06-16-29-3 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Jereme Morgan, CT HQ - Sacramento Structural Materials Testing Laboratory | 06/26/2026 | 06/26/2026 | No | ||||
| 2026-06-16-29-4 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Kevin De Souza, CT HQ - Sacramento Structural Materials Testing Laboratory | 07/09/2026 | 07/09/2026 | No | ||||
| 2026-06-16-29-5 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Kevin De Souza, CT HQ - Sacramento Structural Materials Testing Laboratory | 07/09/2026 | 07/09/2026 | No | ||||
| 2026-06-16-29-6 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Kevin De Souza, CT HQ - Sacramento Structural Materials Testing Laboratory | 07/09/2026 | 07/09/2026 | No | ||||
| 2026-06-16-29-7 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | Kevin De Souza, CT HQ - Sacramento Structural Materials Testing Laboratory | 07/09/2026 | 07/09/2026 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2026-06-16-29-1 ASME B1.2-83r17
DIME Test ID: 2026-06-16-29-2 ASME B1.2-83r17
DIME Test ID: 2026-06-16-29-3 ASME B1.2-83r17
DIME Test ID: 2026-06-16-29-4 ASTM B499-09r21
DIME Test ID: 2026-06-16-29-5 ASTM B499-09r21
DIME Test ID: 2026-06-16-29-6 ASTM B499-09r21
DIME Test ID: 2026-06-16-29-7 ASTM F606-21