Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-06-02-37

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1002270
DEA: 113A9294
EFIS: 1125000135
DIST-CO-RTE-PM11---unknown
Award DateNot set
Closeout DateNot set
Work DescriptionNot set
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date06/02/2026 Sample Unique Key37
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/03/2026
Sample typeVerification A brief description of the sampleJMF
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byMohammed Last name of sampler or witnessed byMasud
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMartin Marietta Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number23418180T3
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-06-02-37-2CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory06/24/202606/24/2026
Yes
06/30/2026Complies Target < 12.7 mm Tested an Avg of 7.02 mmPublic - Test Data Visible
2026-06-02-37-4AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory06/18/202607/01/2026
Yes
07/07/2026Does Not Comply Oven #3Public - Test Data Visible
2026-06-02-37-5AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory06/22/202606/22/2026
Yes
06/30/2026Complies Target is within 0.024 from high Gmb to low Gmb Tested low-2.889 and high 2.397Public - Test Data Visible
2026-06-02-37-6AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory06/22/202606/22/2026
Yes
06/30/2026Complies Target 4.0 % +/- 1.5 % Tested an Avg of 3.5 % Public - Test Data Visible
2026-06-02-37-7AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory06/22/202606/22/2026
Yes
06/30/2026Does Not Comply - Target 2.449 Tested 2 times 1) 2.479 and 2) 2.476 Used 2.479 for Calcs Public - Test Data Visible
2026-06-02-37-8AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Melchor Oronoz, CT D11 - District 11 Materials Laboratory07/10/202607/23/2026
Yes
07/23/2026Retest, failed at 8.23%. Max allowed is 8.0%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-06-02-37-2 CTM 389-19 (Verified)
DIME Test ID: 2026-06-02-37-4 AASHTO T308-10 (Verified)
DIME Test ID: 2026-06-02-37-5 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-06-02-37-6 AASHTO T269-14 (Verified)
DIME Test ID: 2026-06-02-37-7 AASHTO T209-12 (Verified)
DIME Test ID: 2026-06-02-37-8 AASHTO T308-10 (Verified)