DIME - Sample Record for DIME Sample ID 2018-02-07-3

DIME » All Projects » Project - DEA: 080G8424 » Sample 2018-02-07-3 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2018-02-07-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211797 DEA: 080G8424 EFIS: 0814000184
DIST-CO-RTE-PM	08-SBD-15-R107.3
Award Date	12/29/2016
Closeout Date	06/23/2021
Work Description	UPGRADE EXISTING SAFETY ROADSIDE REST AREAS (SRRA)
Location Description	SAN BERNARDINO COUNTY ABOUT 30 MILES EAST OF BARSTOW AT C.V. KANE SAFETY ROADSIDE REST AREA
QA Service Level	1 (Verified on 02/08/2017)

Sample Information

Sample Taken Date	02/07/2018	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/08/2018
Sample type	Verification	A brief description of the sample	F1554 gr. 55 anchor bolt
The quantity of what the sample constitutes	3	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Flygare
Title of sampler	CT METS QA INSPECTOR	Telephone number of sampler	801-669-2984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	EDSCO Fasteners	Transportation Laboratory (TL) Number	C719149
Inspector Lot Number from the Transportation Laboratory (TL) Form	B76-024-18	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	none
Heat Number(s)	3063614,DL16105990, 1743286214130604, 11722130	Nut Mfg. Lot Number(s)	383997A, 24356-6214130604
Washer Mfg. Lot Number(s)	306322, 0717-582	Bolt Specification	F1554 Gr. 55
Bolt Length(s)	3'-0"	Nut Specification	A194-2H plain/HDG
Washer Specification	F436	Finish	HDG/plain
Diameter/Size	1" x 3'-0"	Bolt Mfg. Lot Number	n/a
Rocap Test Requirement(s)	none	Lubricant Requirements(s)	none
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2018-02-07-3-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/14/2018	02/14/2018	Yes	02/23/2018	A194	Public - Test Data Visible
2018-02-07-3-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/14/2018	02/14/2018	Yes	02/23/2018	A194	Public - Test Data Visible
2018-02-07-3-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/14/2018	02/14/2018	Yes	02/23/2018	A194	Public - Test Data Visible
2018-02-07-3-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/14/2018	02/14/2018	Yes	02/23/2018	A194	Public - Test Data Visible
2018-02-07-3-5	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018	02/15/2018	Yes	02/23/2018		Public - Test Data Visible
2018-02-07-3-6	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018	02/15/2018	Yes	02/23/2018		Public - Test Data Visible
2018-02-07-3-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018		Yes	02/23/2018		Public - Test Data Visible
2018-02-07-3-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018		Yes	02/23/2018		Public - Test Data Visible
2018-02-07-3-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018		Yes	02/23/2018		Public - Test Data Visible
2018-02-07-3-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	02/15/2018		Yes	02/23/2018		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-02-07-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-02-07-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-02-07-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-02-07-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-02-07-3-5 ASTM A370-15 (Verified)
DIME Test ID: 2018-02-07-3-6 ASTM A370-15 (Verified)
DIME Test ID: 2018-02-07-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-07-3-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-30 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-31 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-32 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-07-3-33 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-07-3-34 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-07-3-35 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-07-3-36 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-07-3-37 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-07-3-38 ASTM E18-15 (Verified)