DIME » All Projects » Project - DEA: 11430274 » Sample 2026-05-22-5 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-05-22-5

Project Information

Project IdentifiersProject ID: 1001671
DEA: 11430274
EFIS: 1118000084
DIST-CO-RTE-PM11-SD-76-R17.5/52.2
Award DateNot set
Closeout DateNot set
Work DescriptionCULVERT RESTORATION, INSTALL CURB RAMPS, GUARDRAIL, & HMA-A.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE EAST OF ROUTE 15 TO 0.1 MILE WEST OF ROUTE 79
QA Service Level1 (Verified on 10/01/2025)

Sample Information

Sample Taken Date05/22/2026 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/22/2026
Sample typeVerification A brief description of the sampleJMF
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMartin Marietta Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number23417105
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-05-22-5-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Melchor Oronoz, CT D11 - District 11 Materials Laboratory05/29/202606/02/2026
No
Does not comply. Tested 5.03%, max allowed is 4.95% 
2026-05-22-5-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory05/28/202606/01/2026
Yes
06/03/2026Complies Target Gmb within 0.024 from low to high Tested low of 2.406 Gmb and high of 2.410 GmbPublic - Test Data Visible
2026-05-22-5-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory05/28/202606/01/2026
Yes
06/03/2026Complies Target 4.0 % +/- 1.5% Tested an Avg of 3.6 %Public - Test Data Visible
2026-05-22-5-5CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory06/03/202606/03/2026
No
Complies Target < 12.7 mm Tested an Avg of 1.91 mm 
2026-05-22-5-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory06/03/202606/03/2026
Yes
06/05/2026Complies Target WET > 70 psi and DRY > 100 psi Tested WET 71 psi and DRY 137 psiPublic - Test Data Visible
2026-05-22-5-7AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory05/28/202605/28/2026
Yes
06/01/2026Complies Target 2.507 and Tested 2.498 Public - Test Data Visible
2026-05-22-5-8AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory06/04/202606/04/2026
No
Does Not Comply Pending CFs 
2026-05-22-5-9AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory06/11/202606/11/2026
No
Complies RAP 1 Oven 3 
2026-05-22-5-10AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory06/11/202606/11/2026
No
Complies RAP 2 Oven 3 
2026-05-22-5-11AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory06/11/202606/11/2026
No
Complies RAP 3 Oven 3 
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-05-22-5-7 AASHTO T209-12 (Verified)
DIME Test ID: 2026-05-22-5-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-05-22-5-4 AASHTO T269-14 (Verified)
DIME Test ID: 2026-05-22-5-1 AASHTO T308-10
DIME Test ID: 2026-05-22-5-6 AASHTO T283-14 (Verified)
DIME Test ID: 2026-05-22-5-5 CTM 389-19
DIME Test ID: 2026-05-22-5-8 AASHTO T308-25
DIME Test ID: 2026-05-22-5-12 CTM 389-19
DIME Test ID: 2026-05-22-5-9 AASHTO T308-10
DIME Test ID: 2026-05-22-5-10 AASHTO T308-10
DIME Test ID: 2026-05-22-5-11 AASHTO T308-10