Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-05-06-29

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1001213
DEA: 11431644
EFIS: 1122000232
DIST-CO-RTE-PM11-SD-78-N17.7
Award DateNot set
Closeout DateNot set
Work DescriptionCold plane, RHMA overlay, Concrete Barriers, Landscape and Electrical.
Location DescriptionIN SAN DIEGO COUNTY FROM ROUTE 78/5 SEPARATION TO 0.3 MILE EAST OF ESCONDIDO BOULEVARD UNDERCROSSING.
QA Service Level1 (Verified on 05/07/2025)

Sample Information

Sample Taken Date05/06/2026 Sample Unique Key29
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/06/2026
Sample typeQuality Assurance A brief description of the sampleJMFR
The quantity of what the sample constitutes4 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byEddie Last name of sampler or witnessed byBidinger
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameRJ Noble Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number49R003ARSPW
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-05-06-29-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Melchor Oronoz, CT D11 - District 11 Materials Laboratory06/26/202606/29/2026
Yes
06/29/2026THIS TEST HAS BEEN SUPERSEDED.
Does Not Comply
Public - Test Data Visible
2026-05-06-29-3CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory05/13/202605/13/2026
Yes
06/05/2026CompliesPublic - Test Data Visible
2026-05-06-29-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory06/15/202606/16/2026
Yes
06/25/2026Complies Target 12.7 mm tested an Avg of 7.05 mmPublic - Test Data Visible
2026-05-06-29-8AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory05/21/202605/20/2026
Yes
06/29/2026Does Not Comply Target 7.50% Tested 8.10 %Public - Test Data Visible
2026-05-06-29-9CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory05/13/202605/13/2026
Yes
06/05/2026CompliesPublic - Test Data Visible
2026-05-06-29-10AASHTO T269-24E25: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Melchor Oronoz, CT D11 - District 11 Materials Laboratory05/29/202606/03/2026
Yes
06/05/2026CompliesPublic - Test Data Visible
2026-05-06-29-11AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Melchor Oronoz, CT D11 - District 11 Materials Laboratory05/29/202606/03/2026
Yes
06/05/2026Public - Test Data Visible
2026-05-06-29-12AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Melchor Oronoz, CT D11 - District 11 Materials Laboratory05/29/202606/03/2026
Yes
06/05/2026Public - Test Data Visible
2026-05-06-29-13AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory05/18/202607/02/2026
Yes
07/02/2026Test in Oven #1. CF is 0.24. Does Not Comply Target 7.50% Tested 8.52Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-05-06-29-3 CTM 375-February 2012 (Verified)
DIME Test ID: 2026-05-06-29-9 CTM 375-February 2012 (Verified)
DIME Test ID: 2026-05-06-29-8 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-06-29-12 AASHTO T209-12 (Verified)
DIME Test ID: 2026-05-06-29-11 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-05-06-29-10 AASHTO T269-24E25 (Verified)
DIME Test ID: 2026-05-06-29-6 CTM 389-19 (Verified)
DIME Test ID: 2026-05-06-29-1 AASHTO T308-10 (Verified)
DIME Test ID: 2026-05-06-29-13 AASHTO T308-10 (Verified)