DIME » All Projects » Project - DEA: 11431644 » Sample 2026-04-01-9 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-04-01-9

Project Information

Project IdentifiersProject ID: 1001213
DEA: 11431644
EFIS: 1122000232
DIST-CO-RTE-PM11-SD-78-N17.7
Award DateNot set
Closeout DateNot set
Work DescriptionCold plane, RHMA overlay, Concrete Barriers, Landscape and Electrical.
Location DescriptionIN SAN DIEGO COUNTY FROM ROUTE 78/5 SEPARATION TO 0.3 MILE EAST OF ESCONDIDO BOULEVARD UNDERCROSSING.
QA Service Level1 (Verified on 05/07/2025)

Sample Information

Sample Taken Date04/01/2026 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/01/2026
Sample typeProduction Start-Up A brief description of the sampleJMFR
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byEddie Last name of sampler or witnessed byBidinger
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameRJ Noble Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number49R003ARSPW
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-04-01-9-4AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory04/16/202604/13/2026
No
Complies Oven #3  
2026-04-01-9-5AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory04/13/202604/13/2026
Yes
04/17/2026Complies Target Gmb within 0.024 from the High 2.329 to the low 2.326 Public - Test Data Visible
2026-04-01-9-6AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory04/13/202604/13/2026
Yes
04/17/2026Complies Target is 4.0 % Air Voids +/- 1.5 % Tested and Avg of 2.6 % Air Voids Public - Test Data Visible
2026-04-01-9-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory04/15/202604/15/2026
No
Complies Target < 12.7 mm Tested an Avg of 3.69 mm 
2026-04-01-9-10AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory04/08/202604/08/2026
Yes
04/14/2026Does Not Comply Target 2.452 Tested 2 times 1st - 2.391 and 2nd 2.392 . Used 2.392 for Rice CalculationsPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-04-01-9-4 AASHTO T308-25
DIME Test ID: 2026-04-01-9-5 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-04-01-9-6 AASHTO T269-14 (Verified)
DIME Test ID: 2026-04-01-9-7 CTM 389-19
DIME Test ID: 2026-04-01-9-10 AASHTO T209-12 (Verified)