DIME - Sample Record for DIME Sample ID 2017-12-14-8

DIME » All Projects » Project - DEA: 06471504 » Sample 2017-12-14-8 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2017-12-14-8

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 209146 DEA: 06471504 EFIS: 0600000464 COOP: 061549
DIST-CO-RTE-PM	06-TUL-99-39.6/41.3
Award Date	02/24/2017
Closeout Date	03/03/2020
Work Description	RECONSTRUCT INTERCHANGE WITH NEW PUMPING PLANT.
Location Description	TULARE COUNTY AT GOSHEN FROM 0.9 MILE NORTH OF ROUTE 99/198 WEST SEPARATION TO 0.2 MILE NORTH OF NORTH GOSHEN OVERHEAD
QA Service Level	1 (Verified on 10/08/2013)

Sample Information

Sample Taken Date	12/14/2017	Sample Unique Key	8
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	12/21/2017
Sample type	Quality Assurance	A brief description of the sample	F1554 Gr. 55 Anchor Rod
The quantity of what the sample constitutes	25	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Joe	Last name of sampler or witnessed by	Lanz
Title of sampler	QA	Telephone number of sampler	707 208-5241
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Structural and Steel Products	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	L-106-023-17	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	NA
Heat Number(s)	Bolt 3074489, HDG NUT 144210, Plain NUT 3064260, Washer 305358	Nut Mfg. Lot Number(s)	DYSON HDG, DDBR AmeriBolt Plain, W1380
Washer Mfg. Lot Number(s)	Wrought Washer, 305392	Bolt Specification	F1554-GR 55
Bolt Length(s)	40"	Nut Specification	A563 GR DH
Washer Specification	F436	Finish	HDG one end
Diameter/Size	2"	Bolt Mfg. Lot Number	MADDEN, NA
Rocap Test Requirement(s)	NA	Lubricant Requirements(s)	WAX on Galvanized section
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Privacy Level
2017-12-14-8-1	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018	01/04/2018	Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-2	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018	01/04/2018	Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-4	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-5	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-6	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible
2017-12-14-8-10	ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	01/04/2018		Yes	01/12/2018	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-12-14-8-1 ASTM A370-15 (Verified)
DIME Test ID: 2017-12-14-8-2 ASTM A370-15 (Verified)
DIME Test ID: 2017-12-14-8-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-8-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-8-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-8-6 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-8-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-8-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-8-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-8-10 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-8-11 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-8-12 ASTM E18-15 (Verified)