Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-03-12-30

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 995065
DEA: 112N1764
DIST-CO-RTE-PM11-IMP-8-R50.3/R96.7
Award Date05/01/2025
Closeout DateNot set
Work DescriptionMICROSURFACING, SHOULDER BACKING, PAVEMENT MARKING, & INSTALL SIGNS.
Location DescriptionIMPERIAL COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE WEST OF BONDS CORNER OVERCROSSING TO 0.2 MILE EAST OF FOURTH AVENUE OVERCROSSING .
QA Service Level1 (Verified on 06/11/2024)

Sample Information

Sample Taken Date03/12/2026 Sample Unique Key30
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/13/2026
Sample typeVerification A brief description of the sampleJMFR
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameAPI Gateway Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number40 API Val
Binder content (%)0.0 Virgin binder PG PG 70-10
Design binder PG PG 70-10 Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip typeLime

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-03-12-30-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory03/25/202603/25/2026
Yes
03/25/2026Complies Target 7.50% tested a 7.39 % 
2026-03-12-30-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory03/17/202603/17/2026
Yes
03/25/2026Does Not Comply to Target Value of 2.435 Gmm . Conducted 2 Rice tests that had the same result of 2.397 Gmm 
2026-03-12-30-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory03/17/202603/17/2026
Yes
03/25/2026Complies Target Pucks within 0.20 lower to higher Gmb 
2026-03-12-30-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory03/17/202603/17/2026
Yes
03/25/2026Complies Target 5.0% +/- 1.5 % Tested an Avg of 3.5 % 
2026-03-12-30-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory03/24/202603/24/2026
Yes
03/25/2026Complies Target WET > 70 psi DRY > 100 psi 
2026-03-12-30-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory03/23/202603/23/2026
Yes
03/25/2026Complies Target < 12.7 mm Tested an Avg of 6.19 mm 
2026-03-12-30-7CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory04/02/202604/02/2026
Yes
04/03/2026CompliesPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-03-12-30-1 AASHTO T308-10 (Verified)
DIME Test ID: 2026-03-12-30-2 AASHTO T209-12 (Verified)
DIME Test ID: 2026-03-12-30-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-03-12-30-4 AASHTO T269-14 (Verified)
DIME Test ID: 2026-03-12-30-5 AASHTO T283-14 (Verified)
DIME Test ID: 2026-03-12-30-6 CTM 389-19 (Verified)
DIME Test ID: 2026-03-12-30-7 CTM 375-February 2012 (Verified)