Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2026-02-03-2

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000852
DEA: 112N1974
EFIS: 1123000094
DIST-CO-RTE-PM11-IMP-111-23.5/32.1
Award Date04/16/2025
Closeout DateNot set
Work DescriptionCOLD PLANE, HMA-A, RHMA-G, MICROSURFACING, & PAVEMENT MARKINGS.
Location DescriptionIMPERIAL COUNTY NEAR BRAWLEY AND CALIPATRIA AT VARIOUS LOCATIONS FROM 0.2 MILE SOUTH OF ROUTE 78 TO 0.4 MILE SOUTH OF ROUTE 115
QA Service Level1 (Verified on 05/02/2025)

Sample Information

Sample Taken Date02/03/2026 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/03/2026
Sample typeVerification A brief description of the sampleJMFR
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of samplerTET Telephone number of sampler6199021073
Laboratory sample identification26-02-03-2-JMFR Linked DIME Sample ID2026-02-03-3
The fabricator/manufacturer/facility nameAPI Gateway Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number2 API Val
Binder content (%)0.0 Virgin binder PG PG 70-10
Design binder PG PG 70-10 Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip typeLime

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2026-02-03-2-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory02/04/202602/18/2026
Yes
02/24/2026CompliesPublic - Test Data Visible
2026-02-03-2-4AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory02/04/202602/04/2026
Yes
02/18/2026CompliesPublic - Test Data Visible
2026-02-03-2-5AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory02/04/202602/05/2026
Yes
02/18/2026CompliesPublic - Test Data Visible
2026-02-03-2-6AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Shawn Rivers, CT D11 - District 11 Materials Laboratory02/04/202602/05/2026
Yes
02/18/2026CompliesPublic - Test Data Visible
2026-02-03-2-7AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory02/12/202602/12/2026
Yes
02/18/2026Complies Target WET - 70 psi and DRY 100 psi / Tested WET -163 psi and DRY - 209 psiPublic - Test Data Visible
2026-02-03-2-8CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory02/10/202602/10/2026
Yes
02/18/2026Complies Target < 12.7 mm Tested an Avg of 7.40 mmPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2026-02-03-2-1 AASHTO T308-10 (Verified)
DIME Test ID: 2026-02-03-2-4 AASHTO T209-12 (Verified)
DIME Test ID: 2026-02-03-2-5 AASHTO T275-07r12 (Verified)
DIME Test ID: 2026-02-03-2-6 AASHTO T269-14 (Verified)
DIME Test ID: 2026-02-03-2-7 AASHTO T283-14 (Verified)
DIME Test ID: 2026-02-03-2-8 CTM 389-19 (Verified)