Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2025-12-18-69
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994901 DEA: 112T3434 EFIS: 1120000081 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-805-5.1/8.3 |
| Award Date | 01/29/2024 |
| Closeout Date | Not set |
| Work Description | SOUNDWALLS, WIDEN FREEWAY, STRUCTURES, LANDSCAPE AND ELECTRICAL. |
| Location Description | SAN DIEGO COUNTY IN CHULA VISTA FROM PALOMAR STREET OVERCROSSING TO 0.5 MILE NORTH OF BONITA ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 03/21/2024) |
Sample Information
| Sample Taken Date | 12/18/2025 | Sample Unique Key | 69 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/19/2025 |
| Sample type | Production Start-Up | A brief description of the sample | PSU |
| The quantity of what the sample constitutes | 3 bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Mohammed | Last name of sampler or witnessed by | Masud |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 220200 Otay Val |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-12-18-69-5 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-12 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-10 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-6 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-1 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-13 | AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | RAP | |||
| 2025-12-18-69-9 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No | ||||
| 2025-12-18-69-8 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 12/31/2025 | 12/31/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-12-18-69-5 AASHTO T27-14
DIME Test ID: 2025-12-18-69-12 AASHTO T30-19
DIME Test ID: 2025-12-18-69-3 AASHTO T176-08
DIME Test ID: 2025-12-18-69-10 AASHTO T96-02r10
DIME Test ID: 2025-12-18-69-7 AASHTO T335-09r13
DIME Test ID: 2025-12-18-69-6 ASTM D4791-10
DIME Test ID: 2025-12-18-69-1 CTM 204-June 2010
DIME Test ID: 2025-12-18-69-13 AASHTO T209-22
DIME Test ID: 2025-12-18-69-9 AASHTO T85-13
DIME Test ID: 2025-12-18-69-8 AASHTO T84-14
DIME Test ID: 2025-12-18-69-11 AASHTO T304-11
DIME Test ID: 2025-12-18-69-2 AASHTO T209-12