DIME » All Projects » Project - DEA: 060W79U4 » Sample 2025-11-19-66 » Sample Details

Sample Record

Owner Lab

  • Con-Fab California Corporation - Shafter

DIME Sample ID 2025-11-19-66

Project Information

Project IdentifiersProject ID: 1000510
DEA: 060W79U4
EFIS: 0622000189
DIST-CO-RTE-PM06-KER,TUL-99-56.4/57.6,0.0/13.5
Award Date04/10/2025
Closeout DateNot set
Work DescriptionRDWY EXC, HMA, AGGREGATE BASE, CRCP, SIGN STR, AND STR EXC.
Location DescriptionKERN AND TULARE COUNTIES IN AND NEAR DELANO FROM 0.2 MILE SOUTH OF CECIL AVENUE OVERCROSSING TO 0.7 MILE NORTH OF AVENUE 100 OVERCROSSING
QA Service Level1 (Verified on 08/26/2024)

Sample Information

Sample Taken Date11/19/2025 Sample Unique Key66
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/19/2025
Sample typeQuality Control A brief description of the sample1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand
The quantity of what the sample constitutes1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand From where was the sample collectedFabricator
First name of sampler or witnessed byBenjamin Last name of sampler or witnessed byAragon
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCon-Fab California, LLC - Shafter Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Con-Fab California, LLC - Shafter
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile @ Plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-11-19-66-1ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse AggregatesBenjamin Aragon, Con-Fab California Corporation - Shafter12/04/202512/17/2025
Yes
12/17/2025Public - Test Data Visible
2025-11-19-66-2ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine AggregateBenjamin Aragon, Con-Fab California Corporation - Shafter12/04/202512/17/2025
Yes
12/17/2025Public - Test Data Visible
2025-11-19-66-3ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingBenjamin Aragon, Con-Fab California Corporation - Shafter12/04/202512/17/2025
Yes
12/17/2025Sand 1.4%, 1/2" Rock 1.0%, 3/8" Rock 1.1%Public - Test Data Visible
2025-11-19-66-4THIS TEST HAS BEEN SUPERSEDED.
ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying		Adrian Estrada, Con-Fab California Corporation - Shafter11/19/202512/17/2025
Yes
12/17/2025THIS TEST HAS BEEN SUPERSEDED.
Sand 6.9%, 1/2" Rock 1.05%, 3/8" Rock 1.3%		Public - Test Data Visible
2025-11-19-66-5ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by DryingAdrian Estrada, Con-Fab California Corporation - Shafter11/19/202512/17/2025
Yes
12/17/2025Sand 7.0%, 1/2" Rock 1.07%, 3/8" Rock 1.73%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-11-19-66-1 ASTM C136-19 (Verified)
DIME Test ID: 2025-11-19-66-2 ASTM D2419-14 (Verified)
DIME Test ID: 2025-11-19-66-3 ASTM C117-17 (Verified)
DIME Test ID: 2025-11-19-66-4 ASTM C566-19 (Verified)
DIME Test ID: 2025-11-19-66-5 ASTM C566-19 (Verified)