DIME » All Projects » Project - DEA: 112N2074 » Sample 2025-12-09-31 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-12-09-31

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1001056
DEA: 112N2074
EFIS: 1123000286
DIST-CO-RTE-PM11-SD-54,805-Var
Award Date05/23/2025
Closeout DateNot set
Work DescriptionGRIND BRIDGE DECKS, POLYESTER CONCRETE OVERLAY, REPAIR APPROACH SLABS.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS
QA Service Level1 (Verified on 05/30/2025)

Sample Information

Sample Taken Date12/09/2025 Sample Unique Key31
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/10/2025
Sample typeProduction Start-Up A brief description of the samplePSU
The quantity of what the sample constitutes12 boxes From where was the sample collectedSource
First name of sampler or witnessed byMohammed Last name of sampler or witnessed byMasud
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Otay Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number320200 Otay Val
Binder content (%)4.9 Virgin binder PG PG58-16
Design binder PG PG 64-16 Binder SupplierValero
RAP content (%)22 WMA AdditivesNo
Antistrip typeNone

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-12-09-31-1AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory12/15/202512/15/2025
Yes
12/16/2025Does Not Comply - Target 4.90% Tested twice and both burns FAILED 1st - 5.49% and 2nd - 5.47 %Public - Test Data Visible
2025-12-09-31-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory12/18/202512/15/2025
Yes
12/16/2025Complies Target 2.495 Gmm Tested 2.502 Gmm Public - Test Data Visible
2025-12-09-31-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory12/18/202512/15/2025
Yes
12/16/2025Complies Target with 0.940 Gmb Tested 2.372 to 2.376Public - Test Data Visible
2025-12-09-31-4AASHTO T269-24E25: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory12/15/202512/15/2025
Yes
12/16/2025Complies Target 4.0% +/- 1.5% Tested an Avg of 5.1%Public - Test Data Visible
2025-12-09-31-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory12/18/202512/18/2025
Yes
12/22/2025Complies Target WET > 70 psi and DRY > 100 psi / Tested WET - 116 psi and DRY 159 psiPublic - Test Data Visible
2025-12-09-31-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory12/18/202512/18/2025
Yes
12/22/2025Complies Target < 12.70 mm Tested an Avg of 1.30 mmPublic - Test Data Visible
2025-12-09-31-7AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory12/19/202512/16/2025
Yes
12/17/20253 RAP burnsPublic - Test Data Visible
2025-12-09-31-8AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Melchor Oronoz, CT D11 - District 11 Materials Laboratory12/17/202512/17/2025
Yes
12/17/2025Retest, Complies. Req. 4.9%, Tested 5.07%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-12-09-31-1 AASHTO T308-25 (Verified)
DIME Test ID: 2025-12-09-31-2 AASHTO T209-22 (Verified)
DIME Test ID: 2025-12-09-31-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-12-09-31-4 AASHTO T269-24E25 (Verified)
DIME Test ID: 2025-12-09-31-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-12-09-31-6 CTM 389-19 (Verified)
DIME Test ID: 2025-12-09-31-7 AASHTO T308-25 (Verified)
DIME Test ID: 2025-12-09-31-8 AASHTO T308-10 (Verified)