Sample Record
Owner Lab
- CT HQ - QASI Sacramento Field Office
DIME Sample ID 2025-11-20-4
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.2/R17.8 |
| Award Date | 02/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM |
| QA Service Level | 1 (Verified on 09/30/2024) |
Sample Information
| Sample Taken Date | 11/20/2025 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 11/26/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 3" x 75-1/2" anchor bolts |
| The quantity of what the sample constitutes | 281 pcs | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Joaquin | Last name of sampler or witnessed by | Moreno |
| Title of sampler | Quality Assurance | Telephone number of sampler | 9095268064 |
| Laboratory sample identification | Linked DIME Sample ID | 2025-11-20-4 | |
| The fabricator/manufacturer/facility name | Halo Structural Products | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L161-032-25 | Structure unique identifier | |
| Structure name | Bid Item | 219 - MODIFYING SIGNAL AND LIGHTING SYSTEMS |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | BRAX / 73126616 | |
| Washer Mfg. Lot Number(s) | 190155263 | Bolt Specification | ASTM F1554 |
| Bolt Length(s) | 75-1/2" | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | ASTM A123, ASTM A153 |
| Diameter/Size | 3" | Bolt Mfg. Lot Number | 79018795 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-11-20-4-1 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 12/05/2025 | 12/05/2025 | No | ||||
| 2025-11-20-4-2 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 12/05/2025 | 12/05/2025 | No | ||||
| 2025-11-20-4-3 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory | 12/05/2025 | 12/05/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-11-20-4-1 ASME B1.2-83r17
DIME Test ID: 2025-11-20-4-2 ASME B1.2-83r17
DIME Test ID: 2025-11-20-4-3 ASME B1.2-83r17