DIME » All Projects » Project - DEA: 112N2064 » Sample 2025-11-03-55 » Sample Details

Sample Record

DIME Sample ID 2025-11-03-55

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1001127
DEA: 112N2064
EFIS: 1123000285
DIST-CO-RTE-PM11-SD-94-1.6/R13.3
Award Date06/03/2025
Closeout DateNot set
Work DescriptionPOLYESTER CONCRETE, METHACRYLATE, JOINT SEALS AND APPROACH SLABS.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM 22ND STREET OVERCROSSING TO AVOCADO BOULEVARD OVERCROSSING
QA Service Level1 (Verified on 06/02/2025)

Owner Lab

  • CT D11 - District 11 Materials Laboratory

Sample Information

Sample Taken Date11/03/2025 Sample Unique Key55
Date that the sample was received by the laboratory/organization performing the testing11/04/2025 Sample typeProduction Start-Up
A brief description of the samplePSU The quantity of what the sample constitutes12 boxes
From where was the sample collectedSupplier First name of sampler or witnessed byGerardo
Last name of sampler or witnessed byCordero Title of sampler
Telephone number of sampler6199366795 Laboratory sample identification25-11-03-55
Linked DIME Sample ID2025-11-03-54 The fabricator/manufacturer/facility nameMartin Marietta
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number21217105 MM
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder Supplier
RAP content (%)Not set WMA Additives
Antistrip type

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-11-03-55-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory11/17/202511/17/2025
Yes
11/20/2025Target 5.25 % Tested 5.70 %Public - Test Data Visible
2025-11-03-55-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory11/17/202511/17/2025
Yes
11/20/2025Non Applicable Target 2.472 Public - Test Data Visible
2025-11-03-55-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory11/17/202511/17/2025
Yes
11/20/2025Complies T-275 Public - Test Data Visible
2025-11-03-55-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory11/17/202511/17/2025
Yes
11/20/2025Does Not Comply Target 4.0% +/- 1.5% Tested an Avg of 8.4%Public - Test Data Visible
2025-11-03-55-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory11/21/202512/01/2025
Yes
12/02/2025Complies Target WET . 70 psi DRY > 100 psi Tested WET -127 psi DRY - 197 psiPublic - Test Data Visible
2025-11-03-55-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory11/19/202511/19/2025
Yes
11/20/2025Complies Target < 12.7 mm Tested an Avg of 0.82 mmPublic - Test Data Visible
2025-11-03-55-7AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory11/03/202512/01/2025
Yes
12/02/2025RAP, 3 BurnsPublic - Test Data Visible
2025-11-03-55-8AASHTO T269-24E25: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Melchor Oronoz, CT D11 - District 11 Materials Laboratory11/18/202511/20/2025
Yes
11/20/2025Does not comply Public - Test Data Visible
2025-11-03-55-9CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)Daniel Smith, CT D11 - District 11 Materials Laboratory12/17/202512/17/2025
Yes
12/17/2025Does Not Comply Target 91.0 % to 97.0% Tested 90.2 % Test QA cores onlyPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-11-03-55-2 AASHTO T209-12 (Verified)
DIME Test ID: 2025-11-03-55-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-11-03-55-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-11-03-55-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-11-03-55-6 CTM 389-19 (Verified)
DIME Test ID: 2025-11-03-55-8 AASHTO T269-24E25 (Verified)
DIME Test ID: 2025-11-03-55-7 AASHTO T308-10 (Verified)
DIME Test ID: 2025-11-03-55-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-11-03-55-9 CTM 375-February 2012 (Verified)