Sample Record
Owner Lab
- Stonemont Solutions, Incorporated
DIME Sample ID 2025-10-28-19
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for storing JMF sample data |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 10/28/2025 | Sample Unique Key | 19 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/28/2025 |
| Sample type | Quality Control | A brief description of the sample | Combined Blend Agg Sample |
| The quantity of what the sample constitutes | 1500 | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | James | Last name of sampler or witnessed by | Beal |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | Not set | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Stonemont Stone | Transportation Laboratory (TL) Number | Not set |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0064 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
JMF Information
| HMA Design ID | JMF3512-2025-71-302 - 40132429 - P | Date Created | 10/28/2025 |
|---|---|---|---|
| Submittal | JMF3511-320-2025-76 Submittal In Progress JMF3511-320-2025-77 Submittal In Progress JMF3511-320-2025-78 Submittal In Progress JMF3511-320-2025-79 Submittal In Progress |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-10-28-19-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-4 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-5 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-6 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-7 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-8 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-9 | AASHTO T100-15: Standard Method of Test for Specific Gravity of Soils (Specific Gravity) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal | |||
| 2025-10-28-19-10 | AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness) | James Beal, Stonemont Solutions, Incorporated | 10/28/2025 | 10/28/2025 | No | Submitted from JMF - James Beal |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-10-28-19-1 AASHTO T335-09r13
DIME Test ID: 2025-10-28-19-2 AASHTO T96-02r10
DIME Test ID: 2025-10-28-19-3 AASHTO T176-08
DIME Test ID: 2025-10-28-19-4 AASHTO T304-11
DIME Test ID: 2025-10-28-19-5 ASTM D4791-10
DIME Test ID: 2025-10-28-19-6 CTM 204-June 2010
DIME Test ID: 2025-10-28-19-7 AASHTO T85-13
DIME Test ID: 2025-10-28-19-8 AASHTO T84-14
DIME Test ID: 2025-10-28-19-9 AASHTO T100-15
DIME Test ID: 2025-10-28-19-10 AASHTO T104-99r16
DIME Test ID: 2025-10-28-19-11 CTM 227-December 2014
DIME Test ID: 2025-10-28-19-12 AASHTO T210-15