DIME - Sample Record for DIME Sample ID 2017-10-13-5

DIME » All Projects » Project - DEA: 080G8424 » Sample 2017-10-13-5 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-10-13-5

Project Information

Project Identifiers	Project ID: 211797 DEA: 080G8424 EFIS: 0814000184
DIST-CO-RTE-PM	08-SBD-15-R107.3
Award Date	12/29/2016
Closeout Date	06/23/2021
Work Description	UPGRADE EXISTING SAFETY ROADSIDE REST AREAS (SRRA)
Location Description	SAN BERNARDINO COUNTY ABOUT 30 MILES EAST OF BARSTOW AT C.V. KANE SAFETY ROADSIDE REST AREA
QA Service Level	1 (Verified on 02/08/2017)

Sample Information

Sample Taken Date	10/13/2017	Sample Unique Key	5
Will the laboratory/organization for which you are a member perform testing on this material sample?	No	Date that the sample was received by the laboratory/organization performing the testing	10/17/2017
Sample type	Quality Assurance	A brief description of the sample	1in HDG Nuts and Washers
The quantity of what the sample constitutes	68 nuts 40 washers	From where was the sample collected	Distributor
First name of sampler or witnessed by	Russell	Last name of sampler or witnessed by	Lynch
Title of sampler	QAI	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Bristol Machine	Transportation Laboratory (TL) Number	C939722
Inspector Lot Number from the Transportation Laboratory (TL) Form	L96-189-17	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	Nuts-6214073502 Washer-C65743	Nut Mfg. Lot Number(s)	23094-6214073502
Washer Mfg. Lot Number(s)	32537	Bolt Specification	n/a
Bolt Length(s)		Nut Specification	A563
Washer Specification	F436	Finish	HDG
Diameter/Size	1"	Bolt Mfg. Lot Number
Rocap Test Requirement(s)		Lubricant Requirements(s)
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Privacy Level
2017-10-13-5-2	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-3	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-4	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-5	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-6	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible
2017-10-13-5-11	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Glen Weldon, CT HQ - Sacramento Structural Materials Testing Laboratory	10/19/2017	Yes	10/26/2017	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-10-13-5-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-13-5-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-13-5-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-13-5-5 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-6 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-13-5-13 ASTM E18-15 (Verified)
DIME Test ID: 2017-10-13-5-14 ASTM E18-15 (Verified)
DIME Test ID: 2017-10-13-5-15 ASTM E18-15 (Verified)
DIME Test ID: 2017-10-13-5-16 ASTM F606-14a (Verified)