Sample Record
Owner Labs
- BSK Associates
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2025-05-21-128
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994226 DEA: 042K7004 EFIS: 0417000010 COOP: 042895 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-880-R0.0/11.8 |
| Award Date | 07/13/2023 |
| Closeout Date | Not set |
| Work Description | Cold plane pavement and overlay with RHMA-G/RHMA-O (CAPITAL PREVENTIVE MAINTENANCE) |
| Location Description | ALAMEDA COUNTY IN FREMONT AND NEWARK FROM SANTA CLARA COUNTY LINE TO 0.4 MILE NORTH OF FREMONT BOULEVARD OVERCROSSING |
| QA Service Level | 1 (Verified on 09/13/2022) |
Sample Information
| Sample Taken Date | 05/21/2025 | Sample Unique Key | 128 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 05/22/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2"RHMA-O WMA (OGFC) |
| The quantity of what the sample constitutes | 4 Bags Combined Agg | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Jacob | Last name of sampler or witnessed by | Vega |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D04-SE-25-029 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Pleasanton Drier Drum Plant | Transportation Laboratory (TL) Number | SJ-052125-1 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Lot 3 Sublot 17 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Sample from belt stream at plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | 326114W | Lot number | 3 |
| Sublot number | 17 | Aggregate Mix Number | 326114W |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-05-21-128-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Nicholas Shelly - BSK, BSK Associates | 07/14/2025 | 10/15/2025 | No | Coarse, 2 faced=99.8%, Coarse, 1 faced=100%, Fine, 1 faced=100% | |||
| 2025-05-21-128-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Nicholas Shelly - BSK, BSK Associates | 07/14/2025 | 10/15/2025 | No | Grading C, 100 revolutions=5.4%, 500 revolutions=23.9% | |||
| 2025-05-21-128-3 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Nicholas Shelly - BSK, BSK Associates | 07/14/2025 | 10/15/2025 | No | Flat and elongated particles=0% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-05-21-128-1 AASHTO T335-09r13
DIME Test ID: 2025-05-21-128-2 AASHTO T96-02r10
DIME Test ID: 2025-05-21-128-3 ASTM D4791-10