Sample Record
Owner Labs
- BSK Associates
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2025-08-10-30
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000538 DEA: 042Q6104 EFIS: 0419000030 |
|---|---|
| DIST-CO-RTE-PM | 04-NAP-29-R7.3/13.5 |
| Award Date | 11/04/2024 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, RHMA OVERLAY, INSTALL MGS, CURB RAMP, AND RUMBLE STRIP. |
| Location Description | NAPA COUNTY IN AND NEAR NAPA FROM 0.2 MILE NORTH OF NAPA RIVER BRIDGE OVERHEAD TO 0.1 MILE SOUTH OF SIERRA AVENUE. |
| QA Service Level | 1 (Verified on 08/29/2024) |
Sample Information
| Sample Taken Date | 08/10/2025 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 09/04/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2 RHMA-G |
| The quantity of what the sample constitutes | 4 bags colfeed agg. | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Christian | Last name of sampler or witnessed by | Sousa |
| Title of sampler | Telephone number of sampler | 5306513393 | |
| Laboratory sample identification | D04-SE-25-055 | Linked DIME Sample ID | 2025-08-10-31 |
| The fabricator/manufacturer/facility name | Vulcan Lake Herman Drum Plant | Transportation Laboratory (TL) Number | CON-08102025-1 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-48-0002 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | At the plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 326129 |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-08-10-30-1 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Nicholas Shelly, BSK Associates | 09/17/2025 | 10/21/2025 | No | Grading C, 100 revolutions=4.0%, 500 revolutions=16.8% | |||
| 2025-08-10-30-2 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Nicholas Shelly, BSK Associates | 09/18/2025 | 10/21/2025 | No | Flat and elongated particles=0% | |||
| 2025-08-10-30-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Nicholas Shelly, BSK Associates | 09/18/2025 | 10/21/2025 | No | Coarse, 2 faced=99.1%, Coarse, 1 faced=100%, Fine, 1 faced=100% | |||
| 2025-08-10-30-4 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Nicholas Shelly, BSK Associates | 09/18/2025 | 10/21/2025 | No | Average uncompacted voids=46.1% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-08-10-30-1 AASHTO T96-02r10
DIME Test ID: 2025-08-10-30-2 ASTM D4791-10
DIME Test ID: 2025-08-10-30-3 AASHTO T335-09r13
DIME Test ID: 2025-08-10-30-4 AASHTO T304-11