Sample Record

Owner Lab

  • BSK Associates

DIME Sample ID 2025-05-19-121

Project Information

Project IdentifiersProject ID: 215677
DEA: 044G0804
EFIS: 0412000332
COOP: 042676
DIST-CO-RTE-PM04-SOL-80-R10.4/30.2
Award Date01/18/2022
Closeout DateNot set
Work DescriptionHighway widening, overhead signs, and electronic toll system.
Location DescriptionIn Solano County in Fairfield and Vacaville from 1.0 mile west of Red Top Road Undercrossing to 0.4 mile east of Leisure Town Road Overcrossing.
QA Service Level1 (Verified on 04/11/2022)

Sample Information

Sample Taken Date05/19/2025 Sample Unique Key121
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/05/2025
Sample typeProduction Start-Up A brief description of the sample3/4"HMA with 15% RAP
The quantity of what the sample constitutes2-bags of each Bin#1-4 From where was the sample collectedManufacturer
First name of sampler or witnessed byChristian Last name of sampler or witnessed bySousa
Title of sampler Telephone number of sampler
Laboratory sample identificationD04-SE-25-027 Linked DIME Sample ID2025-05-19-122
The fabricator/manufacturer/facility nameTeichert Woodland Transportation Laboratory (TL) NumberCON-051925-2
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-57-0004
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedAt the plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number1
Sublot number1 Aggregate Mix Number30640432428P

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-05-19-121-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Nicholas Shelly - BSK, BSK Associates09/30/202510/08/2025
No
Coarse, 2 faced=99.1%, Coarse, 1 faced=100%, Fine, 1 faced=100%
2025-05-19-121-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Nicholas Shelly - BSK, BSK Associates09/30/202510/08/2025
No
Grading B, 100 revolutions=5.0%, 500 revolutions=19.8%
2025-05-19-121-3AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Nicholas Shelly - BSK, BSK Associates09/30/202510/08/2025
No
Average uncompacted voids=45.4%
2025-05-19-121-4ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Nicholas Shelly - BSK, BSK Associates09/30/202510/08/2025
No
Flat and elongated particles=0%

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-05-19-121-1 AASHTO T335-09r13
DIME Test ID: 2025-05-19-121-2 AASHTO T96-02r10
DIME Test ID: 2025-05-19-121-3 AASHTO T304-11
DIME Test ID: 2025-05-19-121-4 ASTM D4791-10