Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-09-17-65

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000852
DEA: 112N1974
EFIS: 1123000094
DIST-CO-RTE-PM11-IMP-111-23.5/32.1
Award Date04/16/2025
Closeout DateNot set
Work DescriptionCOLD PLANE, HMA-A, RHMA-G, MICROSURFACING, & PAVEMENT MARKINGS.
Location DescriptionIMPERIAL COUNTY NEAR BRAWLEY AND CALIPATRIA AT VARIOUS LOCATIONS FROM 0.2 MILE SOUTH OF ROUTE 78 TO 0.4 MILE SOUTH OF ROUTE 115
QA Service Level1 (Verified on 05/02/2025)

Sample Information

Sample Taken Date09/17/2025 Sample Unique Key65
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/19/2025
Sample typeVerification A brief description of the sampleJMFR
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byMohammed Last name of sampler or witnessed byMasud
Title of samplerTET Telephone number of sampler6199021073
Laboratory sample identification25-09-17-65-JMFR Linked DIME Sample ID2025-09-17-66
The fabricator/manufacturer/facility nameAPI Gateway Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number1 API Val
Binder content (%)7.5 Virgin binder PG PG 70-10
Design binder PG PG 70-10 Binder SupplierValero
RAP content (%)0 WMA AdditivesNo
Antistrip typeLime

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-09-17-65-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory10/15/202510/15/2025
Yes
10/15/2025Target 7.5%, Correction Factor is + 0.38 . Add 0.38 to 7.65 = 8.03 . Tested 2 times in oven #3 and 1 time in oven #4 and all 3 tests FAILED Public - Test Data Visible
2025-09-17-65-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory10/08/202510/08/2025
Yes
10/15/2025Complies Target 2.419 Tested 2.398Public - Test Data Visible
2025-09-17-65-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory10/08/202510/08/2025
Yes
10/15/2025Complies Public - Test Data Visible
2025-09-17-65-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory10/08/202510/08/2025
Yes
10/15/2025Complies Public - Test Data Visible
2025-09-17-65-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory10/14/202510/14/2025
Yes
10/15/2025Complies Target WET > 70 psi and DRY > 100 psi Tested WET- 98 psi and DRY - 122 psiPublic - Test Data Visible
2025-09-17-65-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory10/13/202510/13/2025
Yes
10/15/2025Complies Target < 12.7 mm Tested an Avg of 8.76 mmPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-09-17-65-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-09-17-65-2 AASHTO T209-12 (Verified)
DIME Test ID: 2025-09-17-65-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-09-17-65-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-09-17-65-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-09-17-65-6 CTM 389-19 (Verified)