Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-09-05-51
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 995229 DEA: 07355404 EFIS: 0719000010 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-2,210-15.0/57.5,R18.7/R19.4 |
| Award Date | 01/30/2024 |
| Closeout Date | Not set |
| Work Description | REPLACE AND INSTALL DRAINAGE SYSTEM, AND PERFORM SLOPE PAVING. |
| Location Description | LOS ANGELES COUNTY ON ROUTE 2 FROM 1.0 MILE NORTH OF CLIFFORD STREET TO MOUNT WATERMAN SKI LIFTS AND ON ROUTE 210 FROM 0.5 MILE EAST OF OCEAN VIEW BOULVEARD OVERCROSSING TO 0.2 MILE EAST OF ALTA CANYADA ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 10/19/2023) |
Sample Information
| Sample Taken Date | 09/05/2025 | Sample Unique Key | 51 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/12/2025 |
| Sample type | Verification | A brief description of the sample | PSUE 3/4" WMA A R15 0.40% EVO |
| The quantity of what the sample constitutes | 4 Bags Combined Agg. & 2 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | VICTOR | Last name of sampler or witnessed by | Pham |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | All American Asphalt-Irwindale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at All American Asphalt Irwindale Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | 103819 IRW | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-09-05-51-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | David Padilla / M.D., CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/18/2025 | No | Combined Virgin Aggregate Gradation | |||
| 2025-09-05-51-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Julius Esonwune, CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/17/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/17/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/17/2025 | 09/18/2025 | No | ||||
| 2025-09-05-51-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R.G. , CT D08 - Fontana Southern Regional Laboratory | 09/17/2025 | 09/18/2025 | No | RAP Gradation After Ignition | |||
| 2025-09-05-51-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R.G. , CT D08 - Fontana Southern Regional Laboratory | 09/18/2025 | 09/18/2025 | No | Combined Virgin Aggregate Gradation W/ RAP Gradation Correction |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-09-05-51-1 AASHTO T27-14
DIME Test ID: 2025-09-05-51-2 AASHTO T84-14
DIME Test ID: 2025-09-05-51-3 AASHTO T85-13
DIME Test ID: 2025-09-05-51-4 AASHTO T96-02r10
DIME Test ID: 2025-09-05-51-5 AASHTO T176-08
DIME Test ID: 2025-09-05-51-6 AASHTO T304-11
DIME Test ID: 2025-09-05-51-7 AASHTO T335-09r13
DIME Test ID: 2025-09-05-51-8 ASTM D4791-10
DIME Test ID: 2025-09-05-51-9 CTM 202-November 2011
DIME Test ID: 2025-09-05-51-10 CTM 202-November 2011