Sample Record
DIME Sample ID 2025-09-05-41
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.2/R17.8 |
| Award Date | 02/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM |
| QA Service Level | 1 (Verified on 09/30/2024) |
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
Sample Information
| Sample Taken Date | 09/05/2025 | Sample Unique Key | 41 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/11/2025 | Sample type | Verification |
| A brief description of the sample | JMF 1/2'' RHMA O SP NO LAS | The quantity of what the sample constitutes | 6BAGS , VIRGIN BIN AGG, 1BAG EA HI-NAT&CRM RUBBER,7QTS PG64-163 QTS RUBBER BLEND |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Drake |
| Last name of sampler or witnessed by | Gustafsun | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 0554O-25 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | WORLD OIL, M.M-EAGLE VALLEY | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-3300-35 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at RJ Noble Orange Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | 51R003ARSPO | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-09-05-41-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | M.O. / R.G., CT D08 - Fontana Southern Regional Laboratory | 09/15/2025 | 09/23/2025 | No | Combined Virgin Aggregate Gradation | |||
| 2025-09-05-41-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 09/16/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 09/13/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | M.O., CT D08 - Fontana Southern Regional Laboratory | 09/12/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 09/15/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla / R.B., CT D08 - Fontana Southern Regional Laboratory | 09/19/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla / R.B., CT D08 - Fontana Southern Regional Laboratory | 09/19/2025 | 09/23/2025 | No | ||||
| 2025-09-05-41-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla / R.B., CT D08 - Fontana Southern Regional Laboratory | 09/19/2025 | 09/23/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-09-05-41-1 AASHTO T27-14
DIME Test ID: 2025-09-05-41-2 AASHTO T84-14
DIME Test ID: 2025-09-05-41-3 AASHTO T85-13
DIME Test ID: 2025-09-05-41-4 AASHTO T96-02r10
DIME Test ID: 2025-09-05-41-5 AASHTO T176-08
DIME Test ID: 2025-09-05-41-6 AASHTO T304-11
DIME Test ID: 2025-09-05-41-7 AASHTO T335-09r13
DIME Test ID: 2025-09-05-41-8 ASTM D4791-10