DIME » All Projects » Project - DEA: 010J8904 » Sample 2025-09-09-30 » Sample Details

Sample Record

DIME Sample ID 2025-09-09-30

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000561
DEA: 010J8904
EFIS: 0119000119
DIST-CO-RTE-PM01-HUM-36-3.9/6.0
Award Date12/06/2024
Closeout DateNot set
Work DescriptionHOT MIX ASPHALT, AGGREGATE BASE, AND STRUCTURAL CONCRETE.
Location DescriptionHUMBOLDT COUNTY AT CARLOTTA FROM 0.2 MILE WEST OF FISHER ROAD TO 0.2 MILE WEST OF WILDER ROAD
QA Service Level1 (Verified on 09/23/2024)

Owner Lab

  • Con-Fab California Corporation - Lathrop

Sample Information

Sample Taken Date09/09/2025 Sample Unique Key30
Date that the sample was received by the laboratory/organization performing the testing09/09/2025 Sample typeQuality Control
A brief description of the sample1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand The quantity of what the sample constitutes1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collectedSource First name of sampler or witnessed byPatrick
Last name of sampler or witnessed byBaddu Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameConFab Lathrop
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Confab California Lathrop
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedPlant Stockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberVER90LV Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-09-09-30-1ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by DryingPatrick Baddu, Con-Fab California Corporation - Lathrop09/09/202509/10/2025
Yes
09/10/2025Sand: 3.12% 1/2": 0.38% 3/8": 0.38%Public - Test Data Visible
2025-09-09-30-2ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse AggregatesPatrick Baddu, Con-Fab California Corporation - Lathrop09/09/202509/10/2025
Yes
09/10/2025Public - Test Data Visible
2025-09-09-30-3ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine AggregatePatrick Baddu, Con-Fab California Corporation - Lathrop09/09/202509/10/2025
Yes
09/10/2025Public - Test Data Visible
2025-09-09-30-4ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingPatrick Baddu, Con-Fab California Corporation - Lathrop09/09/202509/10/2025
Yes
09/10/2025Sand: 1.4% 1/2": 0.47% 3/8": 0.58%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-09-09-30-1 ASTM C566-19 (Verified)
DIME Test ID: 2025-09-09-30-2 ASTM C136-19 (Verified)
DIME Test ID: 2025-09-09-30-3 ASTM D2419-14 (Verified)
DIME Test ID: 2025-09-09-30-4 ASTM C117-17 (Verified)