Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-08-14-55

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 66667
DEA: JMFPP
EFIS: 0019000043
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for JMF Prequalification Program.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date08/14/2025 Sample Unique Key55
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/15/2025
Sample typeVerification A brief description of the sampleJMF Verification
The quantity of what the sample constitutes12 boxes From where was the sample collectedSupplier
First name of sampler or witnessed byGerardo Last name of sampler or witnessed byCordero
Title of samplerTET Telephone number of sampler6199366795
Laboratory sample identification25-08-14-55-JMFV Linked DIME Sample ID2025-08-14-56
The fabricator/manufacturer/facility nameMartin Marietta Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number21218180AH
Binder content (%)7.5 Virgin binder PG PG 64-16
Design binder PG PG 64-16 Binder SupplierSJR
RAP content (%)0 WMA AdditivesNo
Antistrip type1%

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-08-14-55-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory08/21/202508/21/2025
Yes
08/27/2025Complies Target 7.5%, Tested 7.64 % Saved material for T30Public - Test Data Visible
2025-08-14-55-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory08/18/202508/18/2025
Yes
08/19/2025Does Not Comply Target 2.460 Gmb . Tested 2 times 1st - 2.399 Gmb and 2nd - 2.395 Gmb . Will use 2.399 Gmb for our AC CalculationsPublic - Test Data Visible
2025-08-14-55-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory08/19/202508/19/2025
Yes
08/19/2025Complies for T-269 & T-275 but did not meet the Height requirement of 115.0 mm +/- 1.5 mm . Tested an Avg Height 120.9 mmPublic - Test Data Visible
2025-08-14-55-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory08/19/202508/19/2025
Yes
08/19/2025Complies for T-269 and T-275 but did not meet the Height requirement of 115.0 mm +/- 1.5 mm . Tested an Avg Height of 120.9 mm Public - Test Data Visible
2025-08-14-55-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory08/27/202508/27/2025
Yes
08/27/2025Complies Target WET > 70 psi and DRY> 100 psi / Tested WET - 81 psi and DRY - 102 psiPublic - Test Data Visible
2025-08-14-55-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory08/21/202508/21/2025
Yes
08/27/2025Complies - Target < 12.7 mm Tested Avg 3.16 mmPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-08-14-55-1 AASHTO T308-10 (Verified)
DIME Test ID: 2025-08-14-55-2 AASHTO T209-12 (Verified)
DIME Test ID: 2025-08-14-55-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-08-14-55-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-08-14-55-5 AASHTO T283-14 (Verified)
DIME Test ID: 2025-08-14-55-6 CTM 389-19 (Verified)