DIME » All Projects » Project - DEA: 024H0104 » Sample 2025-07-22-79 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2025-07-22-79

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215734
DEA: 024H0104
EFIS: 0218000068
DIST-CO-RTE-PM02-PLU-70-78.3/90.3
Award Date01/29/2025
Closeout DateNot set
Work DescriptionREPLACE AC SURFACING, PLACE HMA AND THERMOPLASTIC TRAFFIC STRIPING.
Location DescriptionPLUMAS COUNTY NEAR PORTOLA FROM 0.4 MILE WEST OF BIG GRIZZLY CREEK BRIDGE TO 0.8 MILE WEST OF SUMMIT SCHOOL DRIVE
QA Service Level1 (Verified on 07/08/2021)

Sample Information

Sample Taken Date07/22/2025 Sample Unique Key79
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/23/2025
Sample typeProduction Start-Up A brief description of the sample1/2"-Inch HMA-A w/25% RAP PG58-22 Albina
The quantity of what the sample constitutesProduction Start Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byRiley Last name of sampler or witnessed byMelvin
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79971 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA) Transportation Laboratory (TL) Number815572
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number
Binder content (%)6.2 Virgin binder PGPG 58-22
Design binder PG PG 64-16 Binder SupplierAlbina (Klamath Falls, OR)
RAP content (%)25 WMA AdditivesNo
Antistrip typeLime

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-07-22-79-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Ferency, CT D02 - Redding Northern Regional Laboratory07/23/202508/13/2025
Yes
08/13/2025Gmm=2.453Public - Test Data Visible
2025-07-22-79-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Sean McWithey, CT D02 - Redding Northern Regional Laboratory08/05/202508/13/2025
Yes
08/13/2025Pb=5.98%Public - Test Data Visible
2025-07-22-79-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Ferency, CT D02 - Redding Northern Regional Laboratory07/31/202508/13/2025
Yes
08/13/2025Gmb=2.381Public - Test Data Visible
2025-07-22-79-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Ferency, CT D02 - Redding Northern Regional Laboratory08/01/202508/13/2025
Yes
08/13/2025Pa=3.0%Public - Test Data Visible
2025-07-22-79-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Ferency, CT D02 - Redding Northern Regional Laboratory08/13/202508/13/2025
Yes
08/13/2025S1=137 psi, S2=127 psi, TSR=93%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-07-22-79-1 AASHTO T209-12 (Verified)
DIME Test ID: 2025-07-22-79-2 AASHTO T308-10 (Verified)
DIME Test ID: 2025-07-22-79-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-07-22-79-4 AASHTO T269-14 (Verified)
DIME Test ID: 2025-07-22-79-5 AASHTO T283-14 (Verified)