Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-07-16-34
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 1001156 DEA: 081L9104 EFIS: 0821000038 COOP: 081734 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-38-51.9 |
| Award Date | 12/17/2024 |
| Closeout Date | Not set |
| Work Description | State Highway 38 at Stanfield Cutoff Roundabout |
| Location Description | Intersection of Stanfield Cutoff and State Highway 38 in the Big Bear area |
| QA Service Level | 2 (Verified on 04/07/2025) |
Sample Information
| Sample Taken Date | 07/16/2025 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/17/2025 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA A SP R20 EVO 0.5% |
| The quantity of what the sample constitutes | 4 bags of comb agg, 2 bags EA RAP (Coarse and Fine) | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Maryanna | Last name of sampler or witnessed by | Landaverde |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0447A-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Valero/ Ingevity/ Cemex Lytle Creek | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0040 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt cut Matich Lytle Creek | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | B6Z | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-07-16-34-11 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | EJ, CT D08 - Fontana Southern Regional Laboratory | 08/14/2025 | 08/14/2025 | No | Combined Virgin Aggregate Gradation. | |||
| 2025-07-16-34-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 07/19/2025 | 08/14/2025 | No | ||||
| 2025-07-16-34-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | FO, CT D08 - Fontana Southern Regional Laboratory | 07/19/2025 | 08/15/2025 | No | ||||
| 2025-07-16-34-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | R, CT D08 - Fontana Southern Regional Laboratory | 07/21/2025 | 08/15/2025 | No | ||||
| 2025-07-16-34-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | SJ, CT D08 - Fontana Southern Regional Laboratory | 07/28/2025 | 08/15/2025 | No | ||||
| 2025-07-16-34-6 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | SJ, CT D08 - Fontana Southern Regional Laboratory | 07/26/2025 | 08/15/2025 | No | ||||
| 2025-07-16-34-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | SJ, CT D08 - Fontana Southern Regional Laboratory | 07/26/2025 | 08/15/2025 | No | ||||
| 2025-07-16-34-8 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | RG/EJ/DM, CT D08 - Fontana Southern Regional Laboratory | 08/06/2025 | 08/15/2025 | No | Comb. Agg. Gradation W/ RAP gradation correlation Factor. | |||
| 2025-07-16-34-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R-G, CT D08 - Fontana Southern Regional Laboratory | 07/22/2025 | 08/15/2025 | No | Rap Grading after ignition. | |||
| 2025-07-16-34-10 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | RG, CT D08 - Fontana Southern Regional Laboratory | 07/21/2025 | 08/15/2025 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-07-16-34-11 AASHTO T27-14
DIME Test ID: 2025-07-16-34-2 AASHTO T84-14
DIME Test ID: 2025-07-16-34-3 AASHTO T85-13
DIME Test ID: 2025-07-16-34-4 AASHTO T96-02r10
DIME Test ID: 2025-07-16-34-5 AASHTO T304-11
DIME Test ID: 2025-07-16-34-6 AASHTO T335-09r13
DIME Test ID: 2025-07-16-34-7 ASTM D4791-10
DIME Test ID: 2025-07-16-34-8 CTM 202-November 2011
DIME Test ID: 2025-07-16-34-9 CTM 202-November 2011
DIME Test ID: 2025-07-16-34-10 AASHTO T176-08