Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-07-10-48
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 995008 DEA: 07370704 EFIS: 0720000138 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-126-R2.4 |
| Award Date | 09/20/2023 |
| Closeout Date | 11/25/2024 |
| Work Description | MODIFY SIGNAL AND LIGHTING SYSTEMS AND INSTALL FLASHING BEACON SYSTEM. |
| Location Description | LOS ANGELES COUNTY AT CHIQUITO CANYON ROAD |
| QA Service Level | 1 (Verified on 08/03/2023) |
Sample Information
| Sample Taken Date | 07/10/2025 | Sample Unique Key | 48 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/14/2025 |
| Sample type | Verification | A brief description of the sample | 3/4" RHMA G SP 1.0% LSM |
| The quantity of what the sample constitutes | 4 Bags of CMB L.T. Agg., 10 Bags of Virgin Agg, 2 Can each of Scrap & Hi-Nat | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Stuart | Last name of sampler or witnessed by | Ahumada |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0427G-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Griffith Edmonston-Lebec | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-15-0068 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Griffith Edmonston-Lebec | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | GRF-23-34 RHMA-LSM | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-07-10-48-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Robert Guillen/D.M., CT D08 - Fontana Southern Regional Laboratory | 07/22/2025 | 08/12/2025 | No | Combined L.T. Aggregate Gradation | Public - Test Data Visible | ||
| 2025-07-10-48-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 07/17/2025 | 08/12/2025 | No | ||||
| 2025-07-10-48-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 07/17/2025 | 08/12/2025 | No | Public - Test Data Visible | |||
| 2025-07-10-48-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 07/19/2025 | 08/12/2025 | No | ||||
| 2025-07-10-48-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 07/17/2025 | 08/12/2025 | No | Public - Test Data Visible | |||
| 2025-07-10-48-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 07/21/2025 | 08/12/2025 | No | ||||
| 2025-07-10-48-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 07/21/2025 | 08/12/2025 | No | ||||
| 2025-07-10-48-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 07/21/2025 | 08/12/2025 | No | Public - Test Data Visible |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-07-10-48-1 AASHTO T27-14
DIME Test ID: 2025-07-10-48-2 AASHTO T84-14
DIME Test ID: 2025-07-10-48-3 AASHTO T85-13
DIME Test ID: 2025-07-10-48-4 AASHTO T96-02r10
DIME Test ID: 2025-07-10-48-5 AASHTO T176-08
DIME Test ID: 2025-07-10-48-6 AASHTO T304-11
DIME Test ID: 2025-07-10-48-7 AASHTO T335-09r13
DIME Test ID: 2025-07-10-48-8 ASTM D4791-10