Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2025-06-23-29
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994962 DEA: 07357304 EFIS: 0719000062 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-6.6/13.1 |
| Award Date | 04/27/2023 |
| Closeout Date | Not set |
| Work Description | REPLACE CONCRETE SLABS AND MEDIAN BARRIER, |
| Location Description | LOS ANGELES COUNTY IN SANTA FE SPRINGS, DOWNEY AND CITY OF COMMERCE FROM 0.2 MILE SOUTH OF ROUTE 5/605 SEPARATION TO 0.1 MILE NORT |
| QA Service Level | 1 (Verified on 07/13/2023) |
Sample Information
| Sample Taken Date | 06/23/2025 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/27/2025 |
| Sample type | Verification | A brief description of the sample | PSUE 3/8" HMA-A-SP R15 PG64-10 |
| The quantity of what the sample constitutes | 4 Bags of Comb. Agg, 2 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Soqouia | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0401A-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | All American Asphalt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at All American Irwindale Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/8 inch |
| The concrete mix design number | 109726 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-06-23-29-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 07/17/2025 | 08/08/2025 | No | Public - Test Data Visible | |||
| 2025-06-23-29-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 07/17/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 06/30/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | R.G. , CT D08 - Fontana Southern Regional Laboratory | 06/30/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | S. Jain, CT D08 - Fontana Southern Regional Laboratory | 07/03/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | S. Jain, CT D08 - Fontana Southern Regional Laboratory | 07/03/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | S. Jain, CT D08 - Fontana Southern Regional Laboratory | 07/03/2025 | 08/08/2025 | No | ||||
| 2025-06-23-29-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R.G. , CT D08 - Fontana Southern Regional Laboratory | 07/02/2025 | 08/08/2025 | No | RAP Gradation after Ignition | |||
| 2025-06-23-29-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R.G. / R.J., CT D08 - Fontana Southern Regional Laboratory | 08/18/2025 | 08/08/2025 | No | Comb Virgin Aggregate Gradation W/ RAP Gradation Correction Factors | Public - Test Data Visible | ||
| 2025-06-23-29-11 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | David Padilla / R.J, CT D08 - Fontana Southern Regional Laboratory | 07/01/2025 | 08/08/2025 | No | Combined Virgin Aggregate Gradation |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-06-23-29-2 AASHTO T84-14
DIME Test ID: 2025-06-23-29-3 AASHTO T85-13
DIME Test ID: 2025-06-23-29-4 AASHTO T96-02r10
DIME Test ID: 2025-06-23-29-5 AASHTO T176-08
DIME Test ID: 2025-06-23-29-6 AASHTO T304-11
DIME Test ID: 2025-06-23-29-7 AASHTO T335-09r13
DIME Test ID: 2025-06-23-29-8 ASTM D4791-10
DIME Test ID: 2025-06-23-29-9 CTM 202-November 2011
DIME Test ID: 2025-06-23-29-10 CTM 202-November 2011
DIME Test ID: 2025-06-23-29-11 AASHTO T27-14